Cut Sheet

PANELS AND PANEL ACCESSORIES Panel accessories
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEACCESSORIES1
Spec-00476 D
Spec-00476
PANEL LIFTING HOOKS
Used to lift a large interior panel to position it in an enclosure lying
on its back and to transport a panel from one location to another.
Comfortable hand grip. Plated finish.
Bulletin: A80
Catalog Number Description
APLH Two lifting hooks with handles
PANEL SUPPORT KIT
Provide additional support for panels on which heavy components
are mounted. Each panel support fits over a collar stud and is then
adjusted so the weight of the panel is partially supported by the
bottom of the enclosure. Locknuts prevent accidental change in
adjustment. A polyethylene-covered base on each panel support
distributes the panel weight and prevents damage to the interior
finish. Constructed of heavy-gauge steel. White finish.
Bulletin: A80
Catalog Number Description
APS3 Two panel supports for 1-door or 2-door enclosures where distance from bottom
of panel to bottom of enclosure is less than 2.25 inches (57mm).
APS9 Two panel supports for free-standing or multi-door enclosures where distance
from bottom of panel to bottom of enclosure is between 2.88 inches (73mm)
and 8.50 inches (216mm).
THREADED PANEL EXTENDERS
Threaded Panel Extenders are
made of plated steel and designed
to raise the panel mounting surface.
Extenders attach to threaded
internal pads. Male and female
thread size is 10-32. Each kit
contains 4 extenders.
Bulletin: A80
Catalog Number
Length (in.)
Length (mm)
APE050 0.50 13
APE100 1.00 25