Cut Sheet

ManualsBrandsnVent Hoffman ManualsBoxes & EnclosuresDoor Stop Kit, "B" Dimension: 16", NEMA 4/12, Stainless Steel

Door Accessories Door StopS

nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEAccessories1

Spec-00568 G

Door stop Kit

AppLicAtioN

Designed for use on most standard nVent HOFFMAN Type 4 and

12 enclosures to secure the door in an open position. Enclosures

must have a “B” dimension of 16.00 in. (406 mm) or more and a

door which opens horizontally. Door Stop Kit is not intended for

use on Concept window door enclosures, or enclosures congured

with a swing-out panel or swing-out rack frame. Door stop kit is not

intended for use in high-wind conditions.

FeAtUres

• Can be mounted at the top or bottom of the door opening

• The angle of the door is easily adjusted by means of a wingnut

• The stop arm slides neatly out of the way when the door is closed

• Maintains UL/CSA Type 4, 4X, and 12 if properly installed in an

nVent HOFFMAN enclosure

speciFicAtioNs

• All parts are plated mild steel

• Includes stainless steel mounting screws and nylon washers

Bulletin: A80

Catalog Number Description

ADStOPK Door Stop Kit

Door stop Kit, WALL-MoUNt eNcLosUres

AppLicAtioN

Designed for use with most standard wall-mount enclosures to

secure the door in an open position. This door stop kit is ideal for

use in applications that require the kind of corrosion protection

that only Type 316 stainless steel can provide. Typical applications

include water treatment, pulp, paper, petroleum, chemical, food and

pharmaceutical processing, and packaging. Door stop kit is not

intended for use in high-wind conditions.

FeAtUres

• Can be mounted at either top or bottom of door

• Can be installed on either left- or right-hinged doors

• Maintains UL/CSA Type 4, 4X, and 12 if properly installed in an

nVent HOFFMAN enclosure

speciFicAtioNs

• All parts are Type 316 stainless steel

• Includes stainless steel mounting screws and nylon washers

Bulletin: A4SY

Catalog Number Description

ADStOPKSS6 Door Stop Kit, Wall-Mount Enclosures

Door stop Kit, LArge eNcLosUres

AppLicAtioN

Designed for use with most standard, free-stand or oor-mount

enclosures to secure the door in a 90-degree open position. This

door stop kit is not intended for use in high-wind conditions.

FeAtUres

• Can be mounted at the top or bottom of the door opening after

drilling two small holes in the door and the enclosure

• Maintains UL/CSA Type 4, 4X, and 12 if properly installed in an

nVent HOFFMAN enclosure

speciFicAtioNs

• All parts are plated mild steel

• Includes stainless steel mounting screws and nylon washers

Bulletin: A80

Catalog Number Description

AlGDStOP2 Door Stop Kit, Large Enclosures

Summary of content (2 pages)

PAGE 1
Door Accessories Door Stops Door Stop Kit APPLICATION Designed for use on most standard nVent HOFFMAN Type 4 and 12 enclosures to secure the door in an open position. Enclosures must have a “B” dimension of 16.00 in. (406 mm) or more and a door which opens horizontally. Door Stop Kit is not intended for use on Concept window door enclosures, or enclosures configured with a swing-out panel or swing-out rack frame. Door stop kit is not intended for use in high-wind conditions.
PAGE 2
Door Accessories Door Stops Door Stop Kit, Free-Stand or Floor-Mount Enclosures APPLICATION Designed for use with most standard, free-stand and floor-mount enclosures to secure the door in a minimum of 90-degree open position. It can be used in a variety of outside plant environments and applications and is designed to meet Telcordia GR-487-CORE vertical door restrainer requirements for wind loading conditions.