Cut Sheet

WEATHER PROTECTION ShieldS
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEACCESSORIES1
Spec-00480 F
Spec-00480
DRIP SHIELD KIT FOR TYPE 12 ENCLOSURES
Protects door hardware from dripping water and settling dust.
Attaches quickly and easily to the enclosure with stainless steel
screws and sealing washers (hardware is furnished). Stainless
steel hinge pin and stainless steel door clamping assemblies are
furnished to replace the standard hinge pin and door clamping
assemblies. A tube of sealing compound is also supplied with
each kit. Manufactured from 14 gauge steel with an ANSI 61 gray
polyester powder paint finish over pretreated surfaces.
Bulletin: A80
Catalog
Number
For
Fits
Enclosure
Size B
in./mm
ADK12A Single-Door Wall-Mount Enclosures 12.00
305
ADK16A Single-Door Wall-Mount Enclosures 16.00
406
ADK20A Single-Door Wall-Mount Enclosures 20.00
508
ADK24A Single-Door Wall-Mount/Floor-Mount Enclosures with Continuous Hinge 24.00
610
ADK30A Single-Door Wall-Mount/Floor-Mount Enclosures with Continuous Hinge 30.00
762
ADK36A Single-Door Wall-Mount/Floor-Mount Enclosures with Continuous Hinge 36.00
914
ADK42A Two-Door Floor-Mount, Continuous Hinge Enclosures 42.00
1067
ADK48A Two-Door Floor-Mount, Continuous Hinge Enclosures-Door Floor-Mount
Enclosures
48.00
1219
ADK60A Two-Door Floor-Mount, Continuous Hinge Enclosuresoor Floor-Mount
Enclosures
60.00
1524
ADK72A Two-Door Floor-Mount, Continuous Hinge Enclosuresoor Floor-Mount
Enclosures
72.00
1829
Two-Door Drip Shield kits are not designed for use on 48.00-in. (1219-mm) wide and 60.00-in. (1524-mm)
wide Two-Door Type 12 Wall-Mount Enclosures.
DRIP SHIELD KIT FOR TYPE 12 FREESTAND AND
FLOORMOUNT ENCLOSURES WITH CONCEALED
HINGES
Protects door hardware from dripping water and settling dust.
Attaches quickly and easily to the enclosure with stainless steel
screws and sealing washers (hardware is furnished). A tube of
sealing compound is also supplied with each kit. Manufactured
from 14 gauge steel with an ANSI 61 gray polyester powder paint
finish over pretreated surfaces.
Bulletin: A80
Catalog Number
For
Fits Enclosure Size B
in./mm
ADK24HH Single-Door Free-Stand/Floor-Mount Enclosures 24.00
610
ADK30HH Single-Door Free-Stand/Floor-Mount Enclosures 30.00
762
ADK36HH Single-Door Free-Stand/Floor-Mount Enclosures 36.00
914
ADK42HH Two-Door Free-Stand/Floor-Mount Enclosures 42.00
1067
ADK48HH Two-Door Free-Stand/Floor-Mount Enclosures 48.00
1067
ADK60HH Two-Door Free-Stand/Floor-Mount Enclosures 60.00
1524
ADK72HH Two-Door Free-Stand/Floor-Mount Enclosures 72.00
1829
STAINLESS STEEL DRIP SHIELD KIT FOR TYPE 4 AND
4X WALLMOUNT ENCLOSURES
Easily installed on Type 4 and 4X wall-mount enclosures (excluding
quick-release latch models). Protects door from dripping water
and settling dust. Attaches quickly and easily to the enclosure with
stainless steel screws and sealing washers (furnished). A tube of
sealing compound is supplied with each kit. Manufactured from 14
gauge Type 316 stainless steel. Kits can be special ordered for other
Hoffman enclosures. Consult factory for more information. Product
maintains UL/CSA Type 4, 4X and 12 rating when properly installed
on a Hoffman enclosure.
Bulletin: A4SY
Catalog Number
Fits Enclosure Size B
in./mm
ADK12SS6 12.00
305
ADK16SS6 16.00
406
ADK20SS6 20.00
508
ADK24SS6 24.00
610
ADK30SS6 30.00
762
ADK36SS6 36.00
914