Cut Sheet

Free-Stand PreFerred-Cutout diSConneCtS Free-Stand diSconnectS and acceSSorieS
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEdiSConneCt1
Spec-00067 N
Free-Stand diSConneCt enCLoSure, tYPe 1
induStrY StandardS
UL508A Listed; Type 1; File No. E61997
cUL Listed per CSA C22.2 No. 14; Type 1; File No. E61997
NEMA/EEMAC Type 1
IEC 60529 IP30
aPPLiCation
Free-Stand Disconnect Enclosures, Type 1, are an economical way
to protect electrical and electronic equipment in applications that
do not require extensive environmental protection.
SPeCiFiCationS
•
14 gauge steel (rear of enclosure is welded 12 gauge for
increased stiffness)
•
4-in. high 10 gauge steel integral lifting base
•
Modiedpreferreddisconnectcutout
•
Heights from 60 in. to 84 in. Usable height inside cabinet 4 in.
less than nominal height.
•
Sturdy 7 gauge lifting tabs
•
Flush doors
•
3-point latch with heavy-duty handle
•
Screwdriver defeater in handle on master door
•
Padlock provision in handle
•
Predrilled holes in lifting base provide bolt-down capability
•
Bonding provision on each door
•
Studs included for mounting optional panels on threaded bolts
•
Optionalrackanglesmounttotopandbottomoffrontanges
FiniSH
RAL 7035 light gray polyester powder paint inside and outside.
Optionalpanelshavewhiteorconductivenish.
aCCeSSorieS
Panels for Free-stand, Type 1 Two-Door Enclosures
HF Side-Mount Filter Fans
Compact Axial Fans
PANELITE Enclosure Lights
ModiFiCation and CuStoMiZation
Hoffman excels at modifying and customizing products to
yourspecications.ContactyourlocalHoffmansalesoceor
distributor for complete information.
BULLETIN: A38D