Cut Sheet

Free-Stand UniverSal-CUtoUt diSConneCtS Free-Stand type 4 diSconnectS
PH 763.422.2211nVent.com/HOFFMAN diSConneCt 6
Spec-01054 E
diSConneCt MoUnting SpaCe
Disconnects are located by dimension E1. Wiring space W1
is available when disconnect is installed in the enclosure. See
Technical Information chapter for E1 Spacing by Enclosure Height
for various disconnect switch manufacturers.
W1 = Wiring Space
See Technical Information chapter for wire bend space.
Refer to
NATIONAL ELECTRICAL CODE, 2005 article 430-10(b) for
wiring space required for line side conductors to be connected to
disconnect.
Verify your application to determine whether wiring
space is adequate.
Consult Space Occupied by Disconnect drawing to determine
whether the disconnect device you are using will t the enclosure
size you have selected.
Consult disconnect
manufacturer for F1
and G1 dimensions.