Cut Sheet
FREESTAND STAINLESS STEEL PREFERREDCUTOUT DISCONNECTS StainleSS Steel General PurPoSe DiSconnectS
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEDISCONNECT1
Spec-00674 G
Spec-00674
GENERAL PURPOSE SINGLEDOOR FREESTAND DISCONNECT, TYPE 4X
INDUSTRY STANDARDS
UL508A Listed; Type 3R, 4, 4X, 12; File No. E61997
cUL Listed per CSA C22.2 No. 94; Type 3R, 4, 4X, 12; File No.
E61997
NEMA/EEMAC: Type 3R, 4, 4X, 12
IEC 60529, IP66
Meets NEMA Type 3RX
APPLICATION
This single-door stainless steel enclosure with quarter-turn
latches is designed to house electronic controls and components. It
provides protection from noncorrosive or mildly corrosive elements
in both indoor and outdoor environments. Typical applications
are in the pharmaceutical, food and beverage, packaging, water,
petroleum and chemical processing industries.
SPECIFICATIONS
•
Type 304 stainless steel 14 gauge doors and body, and 14 or 12
gauge back
•
Seams continuously welded and ground smooth
•
Flange trough collar on all four sides of door openings
•
Seamless foam-in-place one-piece gasket provides water-, oil-
and dust-tight seal against contaminants
•
Heavy-duty three-point latching mechanism on each door,
operated by Hoffman’s black die-cast POWERGLIDE padlocking
handle. Black die-cast quarter-turn latches with slotted insert
provided on the top and bottom of each door.
•
Black Die-Cast POWERGLIDE handle has integral screwdriver
defeater
•
Collar studs on inside of enclosure back for optional mounting
panels
• Concealed stainless steel hinges provide 180-degree door
opening and allow easy door removal and cleaning of hinge area
• Heavy-duty Type 316L stainless steel lifting eyes
• Bonding provision on door; grounding stud on body
• High-impact plastic Data Pocket kit included with enclosure
• Accessory mounting channel provided in enclosure top
FINISH
Stainless steel enclosures are unpainted. External surfaces of
front, sides, top and bottom have a #4 finish. Interior welds are not
finished.
Optional mild steel back panels are painted white. Optional
conductive back panels are available.
ACCESSORIES
See also Accessories.
Electric Heaters
PANELITE Enclosure Lights
Panel Support Kit
Panels for Type 3R, 4,4X, 12 and 13 Enclosures
Stainless Steel Window Kits
MODIFICATION AND CUSTOMIZATION
Hoffman excels at modifying and customizing products to
your specifications. Contact your local Hoffman sales office or
distributor for complete information.
Bulletin: A4S2
Standard Product
Catalog Number
AxBxC in./mm Panel
Conductive
Panel
Panel Size D x E
in./mm
A72HXS2718SSLPQT 72.06 x 26.50 x 18.06
1830 x 673 x 459
A72PM28 A72PM28G 60.00 x 21.75
1524 x 552
A72HXS3224SSLPQT 72.06 x 32.50 x 24.06
1830 x 826 x 611
A72PM34 A72PM34G 60.00 x 27.75
1524 x 705
A72HXS3924SSLPQT 72.06 x 38.50 x 24.06
1830 x 978 x 611
A72PM40 A72PM40G 60.00 x 33.75
1524 x 857