Cut Sheet

FLOOR-MOUNT AND FREE-STAND ENCLOSURES Floor-Mount and Free-Stand encloSureS
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICESTAINLESS STEEL1
Spec-00672 D
GENERAL PURPOSE SINGLE-DOOR FREE-STAND WITH QUARTER-TURN LATCHES, TYPE 4X
INDUSTRY STANDARDS
UL508A Listed; Type 3R, 4, 4X, 12; File No. E61997
cUL Listed per CSA C22.2 No. 94; Type 3R, 4, 4X, 12; File No.
E61997
NEMA/EEMAC: Type 3R, 4, 4X, 12
IEC 60529, IP66
Meets NEMA Type 3RX
APPLICATION
This single-door stainless steel enclosure with quarter-turn latches
is designed to house electronic controls and components. It
provides protection from non-corrosive or mildly corrosive elements
in both indoor and outdoor environments. Typical applications are in
the pharmaceutical, food and beverage, packaging, water, petroleum
and chemical processing industries.
SPECIFICATIONS
•
Type 304 Stainless Steel 14 gauge doors and body, and 14 or 12
gauge back
•
Seams continuously welded and ground smooth
•
Flange trough collar on all four sides of door openings
•
Seamless foam-in-place one-piece gasket provides water-, oil-
and dust-tight seal against contaminants
•
Black die-cast quarter-turn latches with slotted insert provided on
three sides of door
•
Concealed stainless steel hinges provide 180-degree door
opening and allow easy door removal and cleaning of hinge area
•
Heavy-duty Type 316L stainless steel lifting eyes
•
Internal accessory mounting channels welded horizontally to
sides at top, bottom and center
• High-impact plastic Data Pocket kit, attached with pressure-
sensitive adhesive, is included with enclosure
• Bonding provision on door; grounding stud on body
• Accessory mounting channel provided in enclosure top
FINISH
Stainless steel enclosures are unpainted. External surfaces of
front,sides,topandbottomhavea#4nish.Interiorweldsarenot
nished.
Optional mild steel back panels are painted white. Optional
conductive back panels are available.
ACCESSORIES
Electric Heaters
PaneLite Enclosure Lights
Panel Support Kit
Panels for Type 3R, 4, 4X, 12 and 13 Enclosures
Steel, Stainless Steel and Non-Metallic Window Kits
MODIFICATION AND CUSTOMIZATION
nVent HOFFMAN excels at modifying and customizing products to
yourspecications.ContactyourlocalnVentHOFFMANsalesoce
or distributor for complete information.
Bulletin: A4S2
Standard Product
Catalog Number
AxBxC in./mm T Panel
Conductive
Panel
Panel Size D x E
in./mm
A72HS2418SSlPQt 72.06 x 24.06 x 18.06
1830 x 611 x 459
14 ga. A72P24F1 A72P24F1G 60.00 x 20.00
1524 x 508
A72HS3024SSlPQt 72.06 x 30.06 x 24.06
1830 x 764 x 611
14 ga. A72P30F1 A72P30F1G 60.00 x 26.00
1525 x 661
A72HS3624SSlPQt 72.06 x 36.06 x 24.06
1830 x 916 x 611
12 ga. A72P36F1 A72P36F1G 60.00 x 32.00
1524 x 813