Cut Sheet

ManualsBrandsnVent Hoffman ManualsBoxes & EnclosuresEnclosure, Type 4x, Hinged Cover, 6.12" x 4.12" x 4.38"

Polyester POLYPRO, TYPe 4X

nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICENoN-Metallic1

Spec-00214 G

SPEC-00214

PolyPro, tyPe 4X

iNDUstry staNDarDs

Mounting brackets required to meet UL/CSA external mounting

requirements.

UL 508A Listed; Type 4, 4X, 12, 13; File No. E61997

cUL Listed per CSA C22.2 No 94; Type 4, 4X, 12, 13; File No.

E61997

Enclosure flammability evaluated per UL 508A

Window flammability evaluated per UL 508A

NEMA/EEMAC Type 4, 4X, 12, 13

CSA File No. 42186; Type 4, 4X, 12, 13 (solid covers only)

IEC 60529, IP66

aPPlicatioN

POLYPRO polyester enclosures perform exceptionally well in

applications where harsh chemicals, weather extremes and

corrosive environments demand toughness from a lightweight

enclosure. Providing excellent ultraviolet protection and a tight

environmental seal, these versatile, feature-rich enclosures are

also recyclable.

sPeciFicatioNs

•

Non-glass-filled polyester material offers superior UV

resistance; eliminates fiberbloom associated with fiberglass

•

Provides excellent chemical resistance to a broad range of

solvents, alkalis and acids

•

Resists cracking and provides excellent impact resistance

•

Lighter weight than fiberglass

•

Recyclable

•

Easy, dustless in-field modifications using standard tools

•

Overlapping tongue-and-groove raised cover and gasket provide

a secure Type 4X seal

• Removable snap-hinge cover allows for easy access to cover and

body for modifications

• Molded layout grid on inside of body and solid covers assists with

component mounting

• Molded-in embosses for rear panel mounting

• Optional cover screws included with all models

• Internal rail system and adjustable panel blocks allow for panel

height adjustment and installation of multiple panels

• Scratch-resistant polycarbonate windows

• Standard models include body and cover, two mounting feet,

two latch assemblies with optional cover screws and hardware

(adjustable panel blocks and panels sold separately)

FiNisH

Standard finish is RAL 7035 light-gray textured inside and out

accessories

Summary of content (4 pages)

PAGE 1
Polyester POLYPRO, Type 4X SPEC-00214 POLYPRO, TYPE 4X INDUSTRY STANDARDS • Mounting brackets required to meet UL/CSA external mounting requirements. UL 508A Listed; Type 4, 4X, 12, 13; File No. E61997 cUL Listed per CSA C22.2 No 94; Type 4, 4X, 12, 13; File No. E61997 Enclosure flammability evaluated per UL 508A Window flammability evaluated per UL 508A NEMA/EEMAC Type 4, 4X, 12, 13 CSA File No.
PAGE 2
Polyester POLYPRO, Type 4X Standard Product Catalog Number A644PHC A644PHCW A664PHC A664PHCW A864PHC A864PHCW A884PHC A884PHCW A1084PHC A1084PHCW A10106PHC A10106PHCW A12106PHC A12106PHCW A14128PHC A14128PHCW A16148PHC A16148PHCW A181610PHC A181610PHCW AxBxC in./mm 6.12 x 4.12 x 4.38 155 x 105 x 111 6.12 x 4.12 x 4.38 155 x 105 x 111 6.12 x 6.12 x 4.38 155 x 155 x 111 6.12 x 6.12 x 4.38 155 x 155 x 111 8.12 x 6.12 x 4.38 206 x 155 x 111 8.12 x 6.12 x 4.38 206 x 155 x 111 8.12 x 8.12 x 4.
PAGE 3
Polyester POLYPRO, Type 4X ADJUSTABLE PANEL BLOCK KIT Panel blocks slide inside POLYPRO’s internal rail system for panel height adjustment within top 5 in. of enclosure. Allows for installation of multiple panels. BULLETIN: PCRY Catalog Number APNLBLK Qty. 4 Includes Allen wrench $GMXVWDEOH SDQHO EORFN ; POLYESTER MOUNTING BRACKET KITS Replacement POLYPRO mounting brackets are sold in sets of two and include hardware for mounting to enclosure. Included with standard POLYPRO models.
PAGE 4
Polyester POLYPRO, Type 4X STAINLESS STEEL LATCHES (PADLOCKABLE) Stainless Steel Latches can be retrofitted on all POLYPRO models with no modification or drilling required. Hinge/latch constructed of corrosion-resistant polyester with a Type 316L stainless steel bail. Included with standard POLYPRO models. BULLETIN: PCRY Catalog Number AQRLSS6 HINGE RETAINERS Qty. 2 Hinge Retainers can be field-installed without modification to POLYPRO hinges for applications where cover removal is not desired.