Cut Sheet

WALL-MOUNT PREFERRED-CUTOUT DISCONNECTS Type 4 and 12 Wall-MounT disconnecTs
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEDISCONNECT3
Spec-00377 I
DISCONNECT MOUNTING SPACE
Disconnects will occupy space on panel shown by dimensions
E1, F1, and G1. Wiring space W1 is available when disconnect is
installed in the enclosure.
E1 = 8.62 in. (219 mm) when C = 8.00 in. (203 mm)
E1 = 11.62 in. (294 mm) when C = 12.00 in. (305 mm)
W1 = Wiring Space
Refer to
NATIONAL ELECTRICAL CODE, 2005 article 430-10(b) for
wiring space required for line side conductors to be connected to
disconnect.
Verify your application to determine whether wiring space is
adequate.
Consult Space Occupied by Disconnect drawing to determine
whether the disconnect device you are using will t the enclosure
size you have selected.
Consult disconnect
manufacturer for F1
and G1 dimensions.