Cut Sheet

Panels and Panel accessories Panels for enclosures
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEaccessories5
Spec-00310 Z
Junction Box and Wall-mount enclosure
sWing-out Panel Kit
Kits allow mounting standard Hoffman junction box and NEMA
style panels (purchase separately) near the front of the enclosure
for easy access to or reading of gauges, switches, pilot lights and
other components. Kits consist of heavy-gauge brackets and hinges
which are easily installed by drilling small holes in the sides of the
enclosure and bolting the brackets in place. External screws are
stainless steel; internal components are plated steel. All mounting
hardware and instructions are provided. Sealing washers ensure
the enclosure will meet original JIC or NEMA standards after
installation.
Swing-Out Panel Kits do not t single-door disconnect enclosures.
Bulletin: A80
Catalog Number
Description
Maximum
Load (lb.)
Maximum
Load (kg)
Use In
AJCDFK Junction Box Kit 25 11.3 - Junction boxes where A x B is 8.00 x 6.00 in. (203 x 152 mm) or larger
- HCLO Type 3R enclosures where A x B is 16.00 x 12.00 in. (406 x 305 mm) or smaller
AnADFK Wall-Mount Enclosure Kit 100 45.4 - One-door Type 4, 4X, 12 and 13 enclosures where A x B is 12.00 x 12.00 in. (305 x 305 mm) or larger
- HCLO Type 3R enclosures where A x B is 16.00 x 16.00 in. (406 x 406 mm) or larger
- HCR Type 3R enclosures where A x B is 16.00 x 12.00 (406 x 305 mm) or larger
- Type 1 enclosures where A x B is 42.00 x 30.00 in. (1067 x 762 mm) or larger
Both kits maintain UL Type 4 and Type 4X rating when properly installed in a Hoffman enclosure.
Maximum load includes the weight of the panel plus the weight of the components, with the weight of the components spread evenly over the panel.