Cut Sheet

ManualsBrandsnVent Hoffman ManualsBoxes & EnclosuresHOF PANEL PERF N12

Panels and Panel accessories Panels for enclosures

nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEaccessories1

Spec-00310 Z

Perforated Panels

Perforated panels are 16 gauge steel and accept self-tapping screws and eliminate the need to measure, mark and drill when mounting

components. Use for mounting lightweight control components.

Bulletin: PnlP

Catalog Number

Use in Panel Size D x E (in.)

Panel Size D x E (mm)

A6n6PP Small Type 1 Panel Enclosures and Small Type 3R Boxes 4.25 x 4.25 108 x 108

A8n6PP Small Type 1 Panel Enclosures and Small Type 3R Boxes 6.25 x 4.25 159 x 108

A8n8PP Small Type 1 Panel Enclosures and Small Type 3R Boxes 6.25 x 6.25 159 x 159

A10n8PP Small Type 1 Panel Enclosures and Small Type 3R Boxes 8.25 x 6.25 210 x 159

A10n10PP Small Type 1 Panel Enclosures and Small Type 3R Boxes 8.25 x 8.25 210 x 210

A12n10PP Small Type 1 Panel Enclosures and Small Type 3R Boxes 10.25 x 8.25 260 x 210

A12n12PP Small Type 1 Panel Enclosures and Small Type 3R Boxes 10.25 x 10.25 260 x 260

A14n12PP Small Type 1 Panel Enclosures and Small Type 3R Boxes 12.25 x 10.25 311 x 260

A16n12PP Small Type 1 Panel Enclosures and Small Type 3R Boxes 14.25 x 10.25 362 x 260

A20n12PP Small Type 1 Panel Enclosures and Small Type 3R Boxes 18.25 x 10.25 464 x 260

A16n12MPP Medium Type 1 Panel Enclosures 13.00 x 10.50 330 x 267

A16n16MPP Medium Type 1 Panel Enclosures 13.00 x 14.50 330 x 368

A16n20MPP Medium Type 1 Panel Enclosures 13.00 x 18.50 330 x 470

A18n18MPP Medium Type 1 Panel Enclosures 15.00 x 16.50 381 x 419

A20n12MPP Medium Type 1 Panel Enclosures 17.00 x 10.50 432 x 267

A20n16MPP Medium Type 1 Panel Enclosures 17.00 x 14.50 432 x 368

A20n20MPP Medium Type 1 Panel Enclosures 17.00 x 18.50 432 x 470

A24n16MPP Medium Type 1 Panel Enclosures 21.00 x 14.50 533 x 368

A24n20MPP Medium Type 1 Panel Enclosures 21.00 x 18.50 533 x 470

A24n24MPP Medium Type 1 Panel Enclosures 21.00 x 22.50 533 x 572

A30n20MPP Medium Type 1 Panel Enclosures 26.00 x 18.50 660 x 470

A30n24MPP Medium Type 1 Panel Enclosures 26.00 x 22.50 660 x 572

A30n30MPP Medium Type 1 Panel Enclosures 26.00 x 28.50 660 x 724

A36n24MPP Medium Type 1 Panel Enclosures 32.00 x 22.50 813 x 572

A36n30MPP Medium Type 1 Panel Enclosures 32.00 x 26.50 813 x 724

A16P12PP Medium Type 3R Hinged-Cover Panel Enclosures 13.00 x 9.00 330 x 229

A16P16PP Medium Type 3R Hinged-Cover Panel Enclosures 13.00 x 13.00 330 x 330

A20P16PP Medium Type 3R Hinged-Cover Panel Enclosures 17.00 x 13.00 432 x 330

A18P18PP Medium Type 3R Hinged-Cover Panel Enclosures 15.00 x 15.00 381 x 381

A20P20PP Medium Type 3R Hinged-Cover Panel Enclosures 17.00 x 17.00 432 x 732

A24P20PP Medium Type 3R Hinged-Cover Panel Enclosures 21.00 x 17.00 533 x 432

A24P24PP Medium Type 3R Hinged-Cover Panel Enclosures 21.00 x 21.00 533 x 533

A30P24PP Medium Type 3R Hinged-Cover Panel Enclosures 27.00 x 21.00 686 x 533

A36P24PP Medium Type 3R Hinged-Cover Panel Enclosures 33.00 x 21.00 838 x 533

A30P30PP Medium Type 3R Hinged-Cover Panel Enclosures 27.00 x 27.00 686 x 686

A36P30PP Medium Type 3R Hinged-Cover Panel Enclosures 33.00 x 27.00 838 x 686

A36P36PP Medium Type 3R Hinged-Cover Panel Enclosures 33.00 x 33.00 838 x 838

Summary of content (16 pages)

PAGE 1
Panels and Panel Accessories Panels for Enclosures Perforated Panels Perforated panels are 16 gauge steel and accept self-tapping screws and eliminate the need to measure, mark and drill when mounting components. Use for mounting lightweight control components.
PAGE 2
Panels and Panel Accessories Panels for Enclosures 7\SH 5 ( ( ,I ' ! > @ ' ' [ 7\SH ,I ( ! > @ ( r ,I ' ! > @ ' nVent.com/HOFFMAN ,I ( ! > @ PH 763.422.
PAGE 3
Panels and Panel Accessories Panels for Enclosures Panels for Junction Boxes Bulletin: PNLJ, PNLWM ( ; 9 ' ; Steel panels are 14 gauge, finished with white polyester powder paint or with a conductive, corrosion-resistant coating. Stainless steel panels are 14 gauge Type 304 and have a commercial #3 finish which is protected on one side with a plastic film. Aluminum panels are 5052-H32 aluminum alloy 0.080-in. (2-mm) thick and protected on one side with a plastic film.
PAGE 4
Panels and Panel Accessories Panels for Enclosures Composite Panels for Junction Boxes and UL/NEMA Wall-Mount Enclosures Manufactured from light-brown, reinforced phenolic laminate sheet stock. This material has exceptional strength and chemical resistance, which makes it ideally suited for the most corrosive environments. Composite panels are intended for use in corrosionresistant enclosures. Panel sizes are available for junction boxes and UL/NEMA size enclosures.
PAGE 5
Panels and Panel Accessories Panels for Enclosures Junction Box and Wall-Mount Enclosure Swing-Out Panel Kit Kits allow mounting standard Hoffman junction box and NEMA style panels (purchase separately) near the front of the enclosure for easy access to or reading of gauges, switches, pilot lights and other components. Kits consist of heavy-gauge brackets and hinges which are easily installed by drilling small holes in the sides of the enclosure and bolting the brackets in place.
PAGE 6
Panels and Panel Accessories Panels for Enclosures Panels for Type 1 Enclosures and Small Type 3R Enclosures Steel panels are 14 gauge, finished with white polyester powder paint. Panel mounting hardware is furnished with enclosure. Bulletin: PNLT1 Catalog Number A6N4P A6N6P A8N6P A8N8P A10N8P A10N10P A12N10P A12N12P A14N12P A16N12P A20N12P Panel Size D x E (in.) 4.25 x 2.25 4.25 x 4.25 6.25 x 4.25 6.25 x 6.25 8.25 x 6.25 8.25 x 8.25 10.25 x 8.25 10.25 x 10.25 12.25 x 10.25 14.25 x 10.25 18.25 x 10.
PAGE 7
Panels and Panel Accessories Panels for Enclosures Panels for Type 3R, 4, 4X, 12 and 13 Enclosures Steel panels are 11 or 12 gauge, finished with white polyester powder paint or a conductive, corrosion-resistant coating. Larger panels have flanges on two or four sides. Some larger steel panels are 11 gauge and include extra holes for panel lifting. Aluminum panels are 5052H32 aluminum alloy. Larger panels have flanges on four sides. Aluminum panels are protected on one side with a plastic film.
PAGE 8
Panels and Panel Accessories Panels for Enclosures Panel Size D x E (in.) 39.00 x 27.00 39.00 x 27.00 39.00 x 33.00 39.00 x 33.00 39.00 x 33.00 39.00 x 39.00 39.00 x 39.00 45.00 x 21.00 45.00 x 21.00 45.00 x 27.00 45.00 x 27.00 45.00 x 33.00 45.00 x 33.00 45.00 x 33.00 45.00 x 33.00 45.00 x 39.00 45.00 x 39.00 44.00 x 44.00 44.00 x 44.00 50.00 x 38.00 50.00 x 38.00 57.00 x 21.00 57.00 x 21.00 57.00 x 27.00 57.00 x 27.00 57.00 x 33.00 57.00 x 33.00 57.00 x 33.00 57.00 x 33.00 56.00 x 38.00 56.00 x 38.00 56.
PAGE 9
Panels and Panel Accessories Panels for Enclosures Panels for Large Bulletin A27, A28, A28S4 and A34 Multi-Door Enclosures Extra panels for large enclosures, Bulletins A27, A28, A28S4 and A34, can be ordered for panel assembly prior to receiving the enclosures (enclosures include panels). Panels are 11 gauge steel with .80-in. (20-mm) flanges on four sides. Finish is white polyester powder paint or a conductive, corrosion-resistant coating. Two extra holes are provided for lifting and installing panels.
PAGE 10
Panels and Panel Accessories Panels for Enclosures Panels for Free-Stand, Type 1 One-Door Enclosures Panels for free-stand, Type 1 one-door standard and disconnect enclosures are 12 gauge steel. Panels have either polyester powder paint finish or a conductive, corrosion-resistant coating.
PAGE 11
Panels and Panel Accessories Panels for Enclosures Panels for Free-Stand Single- and Dual-Access One-Door Enclosures Panels for one-door, single-access and one-door, dual-access Free-Stand Type 12 Enclosures, Free-Stand Type 4 Enclosures and One-Door Type 4X Free-Stand Fiberglass Enclosures. Panels are 12 gauge steel and can be positioned anywhere along horizontal mounting channels (see dimension drawing Sections B-B for limitations).
PAGE 12
Panels and Panel Accessories Panels for Enclosures Panels for Free-Stand Single- and Dual-Access Two-Door Enclosures Bulletin: PNL30 Panels for two-door single access and two-door dual access FreeStand Type 4, 4X and 12 Enclosures with mounting channel are 11 gauge steel and can be positioned anywhere along horizontal mounting channels (see Sections B-B for limitations). Half-length panels can be located in the upper or lower portion of the enclosure. Some assembly is required.
PAGE 13
Panels and Panel Accessories Panels for Enclosures Side-Mounted Panels Catalog Number A90SMP20 Description Painted steel A90SMP20G Conductive Panel Size DxE in./mm 78.00 x 20.00 1981 x 508 78.00 x 20.00 1981 x 508 Fits Enclosure A in./mm 90.00 2286 90.00 2286 A90SMP14 and A90SMP14G will not fit 18.06-in.deep two-door enclosures (FSD style) if regular panel is also installed. A90SMP20 and A90SMP20G will not fit 20.12-in. deep enclosures. Will not fit 24.12-in.
PAGE 14
Panels and Panel Accessories Panels for Enclosures Center Panel Supports Center panel supports are used with Free-Stand Type 12 (Bulletin A30) two-door enclosures. They permit the installation of panels, swing-out panels and rack-mounting angles sized for one-door enclosures. The Center Panel Support can be positioned from front to back of the enclosure. Bulletin: A80 Standard Product Panel Supports Catalog Number A60FSCPS A72FSCPS A90FSCPS Fits Enclosure A (in.) 60.00 72.00 90.
PAGE 15
Panels and Panel Accessories Panels for Enclosures Swing-Out Panels for Free-Stand Type 4, 4X and 12 Enclosures with Mounting Channel Panels for Free-Stand Type 12 Enclosures, Free-Stand Type 4 Enclosures and One-Door Type 4X Free-Stand Fiberglass Enclosures. Full-length and half-length swing-out panels are available. Half-length panels can be located in the upper or lower portion of the enclosures.
PAGE 16
Panels and Panel Accessories Panels for Enclosures Panels for WiFi Cabinets and Small Wall-Mount Panels are constructed of unfinished 3/4-in. plywood. They are supplied with Fiberglass Hinged-Cover and PolyPro Type 4X WiFi Enclosures Cabinets. Bulletin: DWS12 Panel Size D x E (in.) 4.88 x 4.88 14.75 x 12.88 16.75 x 14.88 Catalog Number A6P6WD A16P14WD A18P16WD Panel Size D x E (mm) 124 x 124 375 x 327 428 x 378 V (in.) .31 .25 .