Cut Sheet

FIBERGLASS Continuous Hinge
PH 763.422.2211nVent.com/HOFFMAN NONMETALLIC 4
Spec-00399 I
QUICKRELEASE LATCH KIT
Two fiberglass-reinforced gray polyester latches with 316L
stainless steel bail and screw-hole plugs are included in each
package. Supplied with Continuous Hinge, Type 4X enclosures
and available for Fiberglass Hinged Cover WiFi Cabinet, Type 4X.
Kit converts screw-cover enclosures to quick-release without
modification. No tools needed to install. Padlocking provision is
included.
Bulletin: A48Y
Catalog Number
Description
Kit Qty.
AL48 Quick-Release Latch Kit 2
SWINGOUT PANEL KIT
The Swing-Out Panel Kit provides
an attractive, cost-effective solution
for installing front-mounted panels
in Continuous Hinge, Type 4X,
and Overlapping Cover, Type 4X
enclosures. No drilling required.
Bulletin: A48Y
Catalog Number
Fits Enclosure
A x B (in.)
Fits Enclosure
A x B (mm)
A6SPK6C 6.00 x 6.00 152 x 152
A8SPK6C 8.00 x 6.00 203 x 152
A10SPK8C 10.00 x 8.00 254 x 203
A12SPK10C 12.00 x 10.00 305 x 254
A16SPK14C 16.00 x 14.00 406 x 356
A18SPK16C 18.00 x 16.00 457 x 406
A14SPK12C 14.00 x 12.00 356 x 305
MOUNTING FOOT KIT
One-piece mounting foot kit consists of the necessary hardware
to attach two fiberglass feet, molded from the same material as
our A48 enclosure. This compression-molded fiberglass material
has excellent chemical and temperature resistance and provides
outstanding performance and durability in harsh environments. The
mounting feet can be field installed on either the 18x16 or the 20x16
enclosure.
Bulletin: A48
Catalog Number
Description
Kit Qty.
A48MFT16A Mounting Foot Kit 2