Cut Sheet
Part Number FLEX3MTC5X50X1
Length (L) 9.84'
∆T 30 K 730 A
∆T 45 K 911 A
∆T 60 K 1,065 A
Conducting Layers (N) 5
A 1.969"
B 0.039"
Cross Section 493.38 kcmil
2 Bar Current Coefficient 1.72
3 Bar Current Coefficient 2.25
Certifications ABS 08-HS365878-2-PDA
Bureau Veritas 02859 BV
CE
CSA 90005
cURus
EAC 0234251 (Russian Federation)
IEC 61439-1 Class II FLEXIBAR
IEC 61439-1 FLEXIBAR
RoHS
Standard Packaging Quantity 1 pc
UPC 78285644758
ADMISSIBLE CURRENTS: This table indicates the temperature rise produced by chosen current in the given section. This calculation does not take into account the heat dissipation
from the switch gear.
∆T = Temperature of conductors – Internal temperature of panel.
Refer to technical documentation for additional ampacity ratings.
ABS is a registered certification mark of American Bureau of Shipping. CSA, CSA-US and C-CSA-US are registered trademarks of Canadian Standards Association. IEC is a registered
trademark of the International Electrotechnical Commission. UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC.
WARNING
Pentair products shall be installed and used only as indicated in Pentair’s product instruction sheets and training materials. Instruction sheets are available at erico.pentair.com and
from your Pentair customer service representative. Improper installation, misuse, misapplication or other failure to completely follow Pentair’s instructions and warnings may cause
product malfunction, property damage, serious bodily injury and death and/or void your warranty.
© 2017PentairAll rights reserved
Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates.
All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.