Cut Sheet
Table Of Contents
AIRCRAFT GROUNDING RECEPTACLES
C
A
BALL, 3/4" DIA.
1/2" PIPE FOR
TYPE RA & RB
CONNECTIONS
B165 and B165R
The B165 and B165R Grounding Receptacles are copper
alloy castings intended for use in static grounding systems of
aircraft refueling areas. They are easily connected to the
grounding system conductor and/or ground rods with
CADWELD connections. Designed for simple installation
flush with the paved surface. The attachment point (3/4" ball)
is an integral part of the casting on the B165 and is
removable on the B165R.
RECEPTACLE B165 and B165R
Depth A, Grade Level to Support 4-1/2
Diameter C, at Grade Level 2-3/4
ERICO Aircraft Static Grounding Clamp
B2617A can be used to connect to the
B165, B165R and B166.
B166 and B167
The B166 and B167 Combination Tie-down and Static
Grounding Receptacles are copper alloy castings. They are
easily connected to the grounding system conductor with
CADWELD connections. Designed for simple installation
flush with the paved surface. The attachment bar (3/4"
diameter on the B166 and 1-1/2" on the B167) is an integral
part of the casting.
RECEPTACLE B166 B167
Depth A, Grade Level to Support 6-1/4 7-1/4
Diameter B, Maximum Ring Size 4-3/4 6-1/2
Diameter C, at Grade Level 3-7/8 4-3/4
See pages 10-6 and 10-7 for CADWELD
connections to aircraft grounding
receptacles
For assemblies using B166 and B167, contact ERICO.
SPECIAL NOTE
SPECIAL NOTE
BALL, 3/4” DIA. (B165R)
BALL, 5/8” DIA. (B165)
1/2” PIPE FOR
TYPE RA & RB
CONNECTIONS
A
1/2” PIPE FOR
TYPE RA & RB
CONNECTIONS
C
ATTACHMENT
BAR
A
C
B
B166/B167
B165/B165R
10-4
Ph: 1-800-677-9089
www.erico.com