Cut Sheet

CC/CG/CHBUSBAR TO STEEL SURFACE
BUSBAR MOLD PART NO. WELD
SIZE CC CG CH METAL
REQUIRED TOOLS
SUGGESTED TOOLS
ACCESSORIES
BUSBAR TO STEEL SURFACE
•A test weld should be made to check the possibility
of burn through when intended for use on thin
sections or thin wall pipe.
• Bold letter in mold part number is the price key.
Cable Cleaning Brush T313 or T314
Slag Removal Spade B136B
Mold Cleaning Brush T394
Rasp T321
Torch Head T111
See Section A
Handle Clamps L160
for C Price Key Molds
L159 for D Price Key Molds
Flint Ignitor T320 (Included with handle clamp
but also available separately)
x 1 CCC-CE CGC-CE CHC-CE 115
x 1-1/2 CCC-CG CGC-CG — 150
1/8 x 1-1/2 & Wider — — CHC-CG 150
x 2 — CGC-CH — 200
x 2 & Wider CCC-CH — — 200
x 1 CCC-DE CGC-DE CHC-DE 150
x 1-1/2 CCC-DG CGC-DG — 200
3/16 x 1-1/2 & Wider — — CHC-DG 200
x 2 — CGC-DH — 250
x 2 & Wider CCC-DH — — 250
x 1 CCC-EE CGC-EE CHC-EE 150
x 1-1/4 CCC-EF CGC-EF CHC-EF 200
x 1-1/2 CCC-EG CGC-EG — 250
1/4 x 1-1/2 & Wider — — CHC-EG 250
x 2 — CGD-EH — 2-150
x 2 & Wider CCD-EH — — 2-150
x 1 CCC-GE CGC-GE CHC-GE 200
x 1-1/2 CCC-GG CGC-GG — 250
3/8 x 1-1/2 & Wider — — CHC-GG 250
x 2 — CGD-GH — 2-200
x 2 & Wider CCD-GH — — 2-200
x 1 CCC-JE CGC-JE CHC-JE 250
x 1-1/2 CCD-JG CGD-JG — 2-200
1/2 x 1-1/2 & Wider — — CHD-JG 2-200
x 2 — CGD-JH — 500
x 2 & Wider CCD-JH — — 500
CC
Horizontal on-edge
bus run to vertical
steel surface
CG
Horizontal bus tap
to horizontal
steel surface
CH
Horizontal bus run
to horizontal
steel surface
7-3
Ph: 1-800-248-WELD
www.erico.com