Cut Sheet

VSVERTICAL STEEL SURFACE
Cable Cleaning Brush T313 or T314
Slag Removal Spade B136A or B136B
Mold Cleaning Brush T394
Rasp T321
Torch Head T111
Handle Clamps L160
for C Price Key Molds
L159 for D Price Key Molds
Flint Ignitor T320 (Included with handle clamp
but also available separately)
VERTICAL STEEL SURFACE
• Cable down at 45° to vertical steel surface including pipe.
• Cable to vertical flat steel surface; cable to side of
vertical or horizontal steel pipe.
• CADWELD also has a complete product line for
cathodic protection connections. See Bulletin CA1A.
• Concentric stranded copper cable listed.
•A test weld should be made to check the possibility
of burn through on thin sections or thin wall pipe.
• Bold letter in mold part number is the price key.
Cable to Vertical Steel Pipe –
Use flat surface mold part number; add V and suffix.
Cable Nominal Pipe Size Suffix
#6 thru 250 30" and smaller Nominal Pipe Size
32" and larger None
Example: 4/0 to 4" pipe, VSC-2Q-V4
Cable to horizontal steel pipe –
Add H and nominal pipe size to flat surface mold number.
Example: 2/0 to 8" pipe, VSC-2G-H8
CABLE MOLD WELD
SIZE PART NO. METAL
6* VSC-1H 45
4VSC-1L 45
2 SOL VSC-1T 45
2VSC-1V 45
1VSC-1Y 65
1/0 VSC-2C 90
2/0 VSC-2G 90
3/0 VSC-2L 115
4/0 VSC-2Q 115
250 VSC-2V 115
300 VSC-3A 150
350 VSC-3D 200
500 VSC-3Q 200
750 VSD-4L 2-150
1000 VSD-4Y 2-200
*Requires B112 sleeve (1 per weld)
REQUIRED TOOLS
SUGGESTED TOOLS
ACCESSORIES
See Section A
VS
TYPE VS
3-7
Ph: 1-800-677-9089
www.erico.com