Cut Sheet

HA/HSHORIZONTAL STEEL SURFACE
Cable Cleaning Brush T313 or T314
Slag Removal Spade B136A or B136B
Mold Cleaning Brush T394
Cable Clamp B265
Torch Head T111
Handle Clamps L160
for C Price Key Molds
L159 for D Price Key Molds
Handles are included with A Price Key Molds
Flint Ignitor T320 (Included with handle clamp or
frame but also available separately)
HORIZONTAL STEEL SURFACE
• Horizontal concentric copper conductor to flat steel surface
or top of horizontal pipe
•CADWELD also has a complete product line for cathodic
protection connections. See Bulletin CA1A.
• A test weld should be made to check the possibility of
burn through on thin sections or thin wall pipe.
• Concentric stranded copper cable listed.
• Bold letter in mold part number is the price key.
CABLE MOLD WELD
SIZE PART NO. METAL
1/0 HSC-2C 90
2/0 HSC-2G 90
3/0 HSC-2L 115
4/0 HSC-2Q 115
250 HSC-2V 115
300 HSC-3A 150
350 HSC-3D 200
500 HSC-3Q 200
750 HSD-4L 2-150
1000 HSD-4Y 2-200
*Requires B112 sleeve (1 per weld)
CABLE MOLD WELD
SIZE PART NO. METAL
6* HAA-1H 45
4 HAA-1L 45
2 SOL HAA-1T 45
2 HAA-1V 45
1 HAA-1Y 65
Cable to Steel Pipe (Types HA and HS) –
Use flat surface mold part number with suffix.
Cable Nominal Pipe Size Suffix
#1 and Smaller 12" and smaller Nominal Pipe Size
14" and larger None
1/0 thru 250 28" and smaller Nominal Pipe Size
30" and larger None
Example: #1 cable to 3-1/2" pipe, HAA-1Y-3.50
For welds to copper surface, see section 5
REQUIRED TOOLS
SUGGESTED TOOLS
ACCESSORIES
See Section A
HA
HS - Cable off surface
HA - Cable on surface
HS
TYPE HA
TYPE HS
3-5
Ph: 1-800-677-9089
www.erico.com