Cut Sheet

Table Of Contents

VERTICAL STEEL SURFACE VN

CABLE MOLD WELD

SIZE PART NO. METAL

6* VNC-1H 45

4VNC-1L 45

2 SOL VNC-1T 65

2VNC-1V 45

1VNC-1Y 65

1/0 VNC-2C 90

2/0 VNC-2G 90

3/0 VNC-2L 115

4/0 VNC-2Q 115

250 VNC-2V 115

300 VNC-3A 150

350 VNC-3D 200

500 VNC-3Q 200

*Requires B112 sleeve (1 per weld)

REQUIRED TOOLS

SUGGESTED TOOLS

ACCESSORIES

Rignt hand shown - RH

VERTICAL STEEL SURFACE

• Conductor to vertical flat steel surface or cable to the

side of horizontal steel pipe.

• Concentric stranded copper cable is listed.

• A test weld should be made to check the possibility

of burn through on thin sections or thin wall pipe.

• Cable to vertical side of horizontal steel pipe. Add right

or left hand and nominal pipe size to flat surface mold

part number.

Example: VNC-2G-LH-4 - weld on left end of conductor,

4" pipe, 2/0 stranded conductor.

• Bold letter in mold part number is the price key.

Handle Clamps L160 for C Price Key Molds

Flint Ignitor T320 (Included with handle clamp but

also available separately)

Cable Cleaning Brush T313 or T314

Slag Removal Spade B136A or B136B

Mold Cleaning Brush T394

Rasp T321

Torch Head T111

See Section A

TYPE VN

3-4

Ph: 1-800-677-9089