Cut Sheet

ManualsBrandsnVent Erico ManualsConnectorsMOLD,CABLE TO STL OR CAST IRON (FLAT OR PIPE)

Table Of Contents

HBHORIZONTAL CAST IRON SURFACE

8 Solid or Stranded, Flat HBA-1G 25XF-19

6 Solid 4" to 24" Pipe HBA-1G-P.S.* 25XF-19

6 Stranded Flat HBA-1H 25XF-19

4" to 24" Pipe HBA-1H-P.S.* 25XF-19

4 Solid Flat HBA-1K 45XF-19

4" to 24" Pipe HBA-1K-P.S.* 45XF-19

4 Stranded Flat HBA-1L 45XF-19

4" to 24" Pipe HBA-1L-P.S.* 45XF-19

2 Solid Flat HBA-1T 45XF-19

4" to 24" Pipe HBA-1T-P.S.* 45XF-19

2 Stranded Flat HBA-1V 45XF-19

4" to 24" Pipe HBA-1V-P.S.* 45XF-19

1 Stranded Flat HBA-1Y 65XF-19

4" to 24" Pipe HBA-1Y-P.S.* 65XF-19

*Specify nominal pipe size, i.e., HBA1G-6 for 6" pipe.

Use flat surface mold part number for pipes larger than 24 inches.

REQUIRED TOOLS

SUGGESTED TOOLS

ACCESSORIES

Handles Handle is included with A Price Key Molds

Flint Ignitor T320 (Included with handle clamp but

also available separately)

Cable Cleaning Brush T313 or T314

Rasp T321

Slag Removal Spade B136A or B136B

Mold Cleaning Brush T394

Torch Head T111

See Section A

HORIZONTAL CAST

IRON SURFACE

•NOT FOR USE ON STEEL PIPE

• CADWELD cable connections to horizontal flat cast iron

surface; cable to top of horiziontal cast iron pipe.

• A test weld should be made on a section of the pipe

being used to determine possibility of detrimental

metallurgical effects.

• Concentric stranded copper cable unless otherwise noted.

• Bold letter in mold part number is the price key.

Note: DUCTILE IRON

Tests by ERICO indicate that connections to

most ductile iron pipe can be made using

the CADWELD molds and weld metal

designated to be used on steel pipe.

However, some reports from the field

suggest that all ductile iron is not the same.

In such cases, the molds and weld material

for cast iron do work.

We therefore suggest:

1. Whenever possible, make tests on the

ductile iron pipe being used to

determine if the material for steel can

be used.

– OR –

2. Use the molds and weld metal

designed for cast iron. It will make

satisfactory connections on all ductile

iron.

Do not use Type HB on soil

pipe (ASTM A74-87)

CONDUCTOR Mold WELD

SIZE SURFACE Part No. METAL

3-3

Ph: 1-800-677-9089