Cut Sheet

NEW PRODUCTS
The CADWELD
®
XB molds are the quickest, most
efficient way to make lapped, horizontal X-style
connections on solid or concentric stranded cable
for a variety of installations.
For cable-to-cable X-style connections at power
substations and other commercial and industrial sites,
there’s never been a faster or easier way to make a
reliable CADWELD connection. This two-piece mold
lets you make connections in a trench in about half
the time it would take with compression connectors
or other exothermic products — and at a fraction of
the cost.
XBQ/XBZ MOLDS
See sec.1, pg 2.
(Reference
Lit. # X6N)
TELECOM LUGS
(Reference Lit. # E108S)
GN CONNECTION
KITS for Wire to
Ground Rods.
(Reference
Lit. # X6M)
ERICO
®
can provide the ideal grounding and bonding
products for wireless telecom applications.
• One CADWELD mold for 7 lug sizes - minimizes
inventory of molds
• Multiple molds are replaced with ONE versatile
mold that utilizes inexpensive conductor sleeves
(no sleeve required for #2 concentric cable)
• No multiple tools or dies required as with crimped
connections
• Superior lug-to-cable connection quality - welded
lug connection will not loosen or corrode
• Ideal for the grounding and bonding requirements
of the codes & standards: NEC, CEC, TIA, BICSI
Whether you’re working in telecommunications, electric
distribution or cable television, here’s everything you
need to make a permanent and reliable wire-to-ground
rod connection at the lowest cost and with maximum
convenience. The CADWELD GN Connection Kit
contains all materials and necessary tools to make sixty
CADWELD connections quickly, easily and inexpensively.
With replacement mold and weld-metal kits, you can
make hundreds more.
The GN mold clamps to the side of ground rods, so
“mushroomed” heads are no problem. You can make
multiple connections to a single rod.