Cut Sheet

MATERIALS, TOOLS & ACCESSORIES SECTION A
Ground Rod Driving Sleeves**
Use a CADWELD ground rod driving sleeve to prevent mushrooming top of ground rod.
Ground Rod Size Part No.
1/2” Copper Bonded or Steel Rod . . . . . . . . . . . . . . . . . . . . . . . . . .B137-14
5/8” Copper Bonded (.563” diameter) . . . . . . . . . . . . . . . . . . . . . . .B137-16
5/8” Steel (.625” diameter) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B137-31
3/4” Copper Bonded (.682” diameter) . . . . . . . . . . . . . . . . . . . . . . .B137-18
3/4” Steel (.750” diameter) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B137-33
1” Copper Bonded (.914” diameter) . . . . . . . . . . . . . . . . . . . . . . . .B137-22
1” Steel (1.00” diameter) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B137-37
** For plain (unthreaded) ground rods only.
Ground Rod Splice Clamp
The B120 Ground Rod Splice Clamp must be used to support the upper rod and provide
a method of correctly positioning the rods and mold while splicing the rods. (Type HDGB
and GB Connection).
GROUND ROD SPECIALTY TOOLS
B120
T320
B321-30
ERITECH
®
Ground Rod Drivers
Product # Description
EGRD58 5' Driver body with insert for up to 5/8" ground rods
EGRD58I* Replacement insert for 5/8" ground rods
EGRD34 5' Driver body with insert for up to 3/4" ground rods
EGRD34I* Replacement insert for 3/4" ground rods
*Both 5/8" and 3/4" inserts fit standard body of EGRD58 or EGRD34.
OTHER TOOLS
Flint Ignitors
T320 CADWELD Flint Ignitors are used to ignite the starting material when making a
CADWELD Connection. An ignitor is included with each Handle Clamp or frame.
T320A Replacement Flints are also available.
Flint Ignitor Extension
B321-30 Flint Ignitor Extension attaches to the T320 Flint Ignitor and allows the installer
to be about 30” from the mold. Ideal for such operations where the mold is in a narrow
trench and the installer is at ground level.
A-10
Ph: 1-800-677-9089
www.erico.com