Cut Sheet

Table Of Contents

MATERIALS, TOOLS & ACCESSORIES SECTION A

Mold Cleaning Brush

Mold cleaning brush T394 is very useful for removing slag from molds – especially

vertical split molds.

Slag Removal Spades

Slag Removal Spades are useful for removing the slag after making a CADWELD

Connection – especially useful with horizontally split molds.

Disks

Each time a weld is made, a new disk is required. The disk sits on the bottom of the

crucible. Its purpose is to hold the powdered weld metal until the reaction takes place.

The slag produced by the reaction rises to the surface and the molten copper settles

to the bottom of the crucible where it melts the disk and flows over the conductors to

produce a permanent molecular bond.

Disks are available in three sizes:

B117A used in molds using #15 thru #32 weld metal (3/4" diameter).

B117B used in molds using #45 thru #115 weld metal (1" diameter).

B117C used in molds using #150 thru #500 weld metal (1-1/2" diameter).

Disks are included with the Weld Metal.

Disk Kit

A disk container (T328) which includes 20 of each of the three sizes of steel disks is avail-

able for your convenience. Kit P/N T328D.

MOLD CARE AND USE

T394

B136A

B136B

T328D

Slag Spade Use With Using

Part No. Mold Price Weld Metal Size

B-136-A A,C, & R #65 & Smaller

B-136-B C,D,F & R #90 & Larger

A-6

Ph: 1-800-677-9089