Cut Sheet

Table Of Contents

SECTION AMATERIALS, TOOLS & ACCESSORIES

T111

T372A

T358

T319

Surefire™ Torch Head

T111 Self igniting propane torch head. Squeeze the control knob for an instant flame.

Release and it’s out. No flame adjusting. The burn tip remains cool during normal

use. Operates on its side or upside down. Can withstand 60MPH winds without flare-

out. Fits all standard 14 and 16 oz. propane cylinders.

SUREFIRE™ is a trademark of IPI

Galvanizing Touch-Up

Easy to use galvanizing paint in a spray can is used to touch up heat affected areas

on galvanized steel surfaces after welding. The damage to the galvanizing is often

minimal so the repair is often cosmetic. T372A galvanizing compound available in

12 ounce aerosol can.

T358 Regalv is a 97% zinc rich organic coating which also can be used to repair

galvanized surfaces. The brush is attached to the cap.

T319 Galvanizing Bar is used to repair a galvanized surface that has

been damaged by welding or drilling. This is a low temperature, self-

fluxing material. Often there is sufficient heat after making the CAD-

WELD Connection to melt the bar or a small torch may be used.

A-5

Ph: 1-800-677-9089