Cut Sheet

CABLE TO GROUND ROD OR OTHER ROUNDS, CATHODIC, GT, COPPER-

BONDED, 3/4" DIA, #6 CONCENTRIC

CATALOG NUMBER

CAGTP181H

nVent ERICO Cadweld Cathodic Connections are the

preferred method of exothermically welding cathodic

protection anode leads to pipes (steel or cast iron), tanks,

and other structures. Cathodic protection systems are

designed to prevent galvanic corrosion along a pipeline or

in various structures. nVent ERICO Cadweld Cathodic

Connections use a special welding material alloy to

minimize heat effect on the steel, which is especially

important on thin wall and high stress pipes.

FEATURES

Forms a permanent, low resistance connection

Provides a molecular bond

nVent ERICO Cadweld Exothermic Connections are rated with the same current capacity as the conductor

Portable installation equipment with no external source of power required

Installers can be easily trained to make nVent ERICO Cadweld Exothermic Connections

Connections can be visually inspected

PRODUCT ATTRIBUTES

Mold Family: GT

Ground Rod Type: Copper-bonded

Ground Rod Diameter, Nominal: 3/4"

Ground Rod Diameter, Actual (Ø): 0.682"

Conductor Size: #6 Concentric

Conductor Outer Diameter, Nominal: 0.184"

Split Crucible: No

Wear Plates: No

Mold Only: No

Welding Material: CA45 or CA45PLUSF33, Sold Separately

Handle Clamp: Mini EZ Attached

PAGE 1
CABLE TO GROUND ROD OR OTHER ROUNDS, CATHODIC, GT, COPPERBONDED, 3/4" DIA, #6 CONCENTRIC CATALOG NUMBER CAGTP181H nVent ERICO Cadweld Cathodic Connections are the preferred method of exothermically welding cathodic protection anode leads to pipes (steel or cast iron), tanks, and other structures. Cathodic protection systems are designed to prevent galvanic corrosion along a pipeline or in various structures.
PAGE 2
Price Key: P Ease of Use: Preferred ADDITIONAL PRODUCT DETAILS For applications such as computer room, tunnel or other low-ventilation areas, specify a smokeless nVent ERICO Cadweld Exolon mold. Add an XL prefix to the standard mold part number when ordering (for example, a TAC2Q2Q becomes XLTAC2Q2Q). Similarly, nVent ERICO Cadweld Exolon welding material is also designated by the XL prefix (for example, 150 becomes XL150). A gap between conductors may be required. See mold tag for more information.
PAGE 3
North America Europe Europe APAC +1.800.753.9221 Netherlands: Germany: Shanghai: Option 1 – Customer Care +31 800-0200135 800 1890272 + 86 21 2412 1618/19 Option 2 – Technical Support France: Other Countries: Sydney: +33 800 901 793 +31 13 5835404 +61 2 9751 8500 Our powerful portfolio of brands: nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER © 2022 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates.