Technical Bulletin
Pyramid ST Strut-Based Supports offer an ideal solution for
mounting electrical and mechanical applications to strut. Superior
load distribution and a low abrasion foam interface combine to
surfaces and shifting caused by expansion and contraction.
•
•
•
metal and spray foam
• Foam bottom offers low abrasion interface for better roof
membrane protection
• Hot-dip galvanized and UV stabilized for long lasting
performance
• Supports green building requirements; thermoplastic bases
are made from recycled material and can contribute to earning
Pyramid ST
Fixed Strut Supports
Provides a fixed-height mounting platform
•
• Multiple sizes and load ratings offer the ability to tailor the
• Easy to transport to the roof
Finish: Hot-dip galvanized
Temperature: –50 to 150°F
Static Load Safety Factor: 3:1
Part Number Strut Length Height Static Load
PSF6C 300 lb
PSF10C
PSF10D
PSF16C
PSF16D
Pyramid ST
Adjustable Strut Supports
strut length.
Pyramid ST
Bridge Assemblies
Provides a fixed-height mounting
platform off the roof surface with
•
• Multiple sizes and load ratings offer the ability to tailor the
solution to the application
Finish: Hot-dip galvanized
Temperature: –50 to 150°F
Static Load Safety Factor: 3:1
Part Number Strut Length Height Static Load
PSA10CH13
PSA16AH18
•
handling units
• Multiple sizes and load ratings offer the ability to tailor the
solution to the application
Finish: Hot-dip galvanized
Temperature: –50 to 150°F
Static Load Safety Factor: 3:1
Part Number Strut Length Height Static Load
PSB24A
PSB30A
PSB36A
PSB42A
PSB48A
PSB60A
Static loads are assumed to be uniformly distributed.
TIP
nVent.com/CADDY
Pyramid ST Strut-Based Supports
“We have standardized on Pyramid ST Series Supports
for our cable tray installations. They are extremely simple
to use and provide a lower total installed cost than wood
blocks, concrete slabs, and other engineered solutions.”
et Réalisation | G2EI
6 | nVent.com/CADDY