Technical Bulletin

16 | nVent.com/CADDY
nVent CADDY Pyramid Tool-Free Supports
The nVent CADDY Pyramid Tool-Free series offers a unique
labor saving solution for supporting electrical and mechanical
applications on a variety of roof surfaces. The nVent CADDY

without the need for metal hardware such as strut clamps or
installation tools. Superior load distribution and a low abrasion
foam interface combine to ensure that the roof membrane is
protected despite varying roof surfaces and shifting caused by
expansion and contraction.
• Push-in fasteners install without the need for additional tools
or hardware
• 
• Plastic fasteners and base will not corrode
nVent CADDY Pyramid
Tool-Free Pipe Support Kit
Provides a fixed height support

(
102 mm
)
off the roof surface
for outside pipe diameters

(
12.7 – 60.3 mm
)
. Kits come

(


)
lengths.
nVent CADDY Pyramid
Tool-Free Cable Tray
Support Kit
Provides a fixed height support

(
102 mm
)
off the roof surface


(

406 mm
)
lengths with securing
pins included.
nVent CADDY Pyramid
Tool-Free Pipe Clamp
Two sizes of clamps allow for
outside pipe diameters between

(
12.7 – 60.3 mm
)
to be restrained on top of the
nVent CADDY Pyramid Tool-Free
series base.
nVent CADDY Pyramid
Tool-Free Cable Tray Pin
Allows for perforated cable tray to
be secured on top of nVent CADDY
Pyramid Tool-Free series bases.