Technical Bulletin

10 | nVent.com/CADDY

system for supporting heavy-duty mechanical services on
rooftop surfaces. Superior load distribution and a low abrasion
foam interface combine to ensure that the roof membrane is
protected despite varying roof surfaces and shifting caused by
expansion and contraction.
• Supports green building requirements; thermoplastic bases
are made from recycled material and can contribute to
earning LEED credits
Pyramid Equipment Support Kit

framing needed for an out of the box
solution to construct a 1 m or 2 m
equipment support.
• 
support clamps
• Assembles and adjusts to size and height in minutes by one
person with one tool
• Innovative crossbar and equipment-support clamps enable

• Integral foam pad provides gentle interface for all roof types
• Hot-dip galvanized and UV stabilized for long lasting
performance
• Assembled support can be lifted as one unit and easily relocated
• Available in 4- or 6-post base configurations

Finish: Hot-dip galvanized
Temperature: –30 to 130°F


Part
Number
Post
Base Width
Surface
Area
Ultimate
Static Load
PEK4B   575 in
2

PEK6B   862 in
2

Static load must be stable and uniformly distributed across frame.
Pyramid EquipmentSupport
Post Base
Individual post base with height

flexibility to create your own equipment
support with strut.
• 
create custom equipment supports
• Height adjustable
• Innovative base design evenly distributes load to help prevent
damage to roof membrane
• Base is manufactured from UV-stabilized thermoplastic material

Finish: Hot-dip galvanized
Temperature: –30 to 130°F
Static Load Safety Factor: 3:1
Part
Number Height
Length /
Width
Surface
Area
Static
Load
PEB   144 in
2
750 lb
PYRAMID EQUIPMENT SUPPORT
CLAMP
Clamp to secure heavy-duty
mechanical equipment when creating
a custom frame out of strut.
• Ideal for use with strut channel type A and square tube to
create custom equipment supports
• Slotted design offers fast and easy installation
Material: Steel
Finish: Hot-dip galvanized
Part Number Strut Type
PEC A
SUPPORT ACCESSORY:
Pyramid Equipment Supports