nVent CADDY Pyramid Rooftop Support System
Plumbing & HVAC Applications ? Why Buy nVent CADDY Pyramid FOR ENGINEERS AND CONSULTANTS: CHALLENGE: • Properly support heavy loads • Minimize the chance of point loading or abrading the roof membrane • Ensure chemical compatibility with anything you place on the roof membrane NVENT CADDY PYRAMID SOLUTION: • Pyramid offers a broad portfolio compatible with most roof surfaces, including single-ply, bituminous, metal and spray foam • Pyramid provides excellent load distribution with some of the industry’s
? Why Buy nVent CADDY Pyramid FOR BUILDING OWNERS: ? Why Buy nVent CADDY Pyramid FOR CONTRACTORS AND INSTALLERS: CHALLENGE: CHALLENGE: • Roofs not only protect some of the most valuable assets, they often represent a significant cost to replace and maintain • Meet the project scope and stay within budget • Provide a high quality installation • Substandard materials and methods can increase the chance of roof damage • Need a fast and easy to install solution • Increasingly, roofs are seen as prim
Hot-dip galvanized for superior corrosion protection Pyramid rooftop supports are a surface mounted solution for supporting electrical and mechanical applications on a variety of roof surfaces. UV stabilized for long lasting performance They offer superior load capacity and dramatically reduce installation time by replacing slow, heavy and labor-intensive methods for support of pipe, conduit, duct, cable tray and equipment.
Rooftop Supports: Load Distribution 115 lbs 350 lbs 500 lbs 570 lbs 770 lbs 1000 lbs psi 0 2 Product P Product BF Product BL Wood 4x4 Product RB X XX XXX XXX XXXX XXXXX Pyramid and other alternative solutions were tested at various loads using a pressure sensitive mat. These graphics show the static load transferred to the roof membrane. There are two key findings from the tests: 1.
Pyramid ST Strut-Based Supports Pyramid ST Adjustable Strut Supports Pyramid ST Strut-Based Supports offer an ideal solution for mounting electrical and mechanical applications to strut. Superior load distribution and a low abrasion foam interface combine to ensure that the roof membrane is protected despite varying roof surfaces and shifting caused by expansion and contraction.
Pyramid ST Strut-Based Supports Also Available: Pyramid 50 Foam-Based Support SUPPORT ACCESSORY: RIGD Single Piece Strut Clamp for Pipe/Rigid Conduit Material: Steel Finish: Stainless • Replaces slow and labor-intensive installation methods • Supports pipe, conduit, cable tray and equipment on roofs and below raised floors • One piece break apart strut clamp (1/2" thru 4" pipe size) • Easily increase load capacity by combining similar Pyramid supports • Fits into open side of strut channel • Protect
Pyramid RL Roller-Based Supports Pyramid RL Roller-Based Supports offer an ideal solution for mechanical piping systems. Long-lasting performance is ensured by providing polymeric rollers for corrosion free rotation. Pyramid RL Roller-Based Supports are specially designed to avoid formation of flat spots and seized rollers during expansion and contraction.
Pyramid H-Frame Pyramid H-Frame Series Support System is a fast and economical solution for a variety of rooftop applications where support height and width exceed those of the Pyramid ST or Pyramid RL series. It provides an ideal support solution for duct, large diameter pipe or cable tray. Superior load distribution and a low abrasion foam interface combine to ensure that the roof membrane is protected despite varying roof surfaces and shifting caused by expansion and contraction.
Pyramid Equipment Supports Pyramid Equipment Support Kit Pyramid Equipment Support is a fast, flexible and innovative system for supporting heavy-duty mechanical services on rooftop surfaces. Superior load distribution and a low abrasion foam interface combine to ensure that the roof membrane is protected despite varying roof surfaces and shifting caused by expansion and contraction.
Pyramid Equipment Supports Pyramid Equipment Support Frame Extension Kit Pyramid Equipment Support Height Extension Height extension used to lift the frame up to 36" off the roof surface.
Pyramid Crossovers and Walkways The Pyramid Crossovers portfolio includes ladders, towers, bridges and platforms that can be combined to provide a safe and clear rooftop walkway. Individual pieces can be easily assembled to meet custom application needs. Superior load distribution and a low abrasion foam interface combine to ensure that the roof membrane is protected despite varying roof surfaces and shifting caused by expansion and contraction.
Pyramid Crossovers and Walkways Pyramid Crossover Support Towers Pyramid Crossover Bridge Supports for walkway systems ranging in height from 20" to 60". Bridge span with handrails connects easily in series and to Pyramid Crossover Ladders to provide an effective walkway.
Pyramid EZ Rubber-Based Supports Feature a wide platform base design to provide reliable support and distribute load across roof surface. These versatile supports are fast and easy to install compared to wood blocks and metal straps.
Pyramid Universal Support • Captive stainless steel nuts allow for custom attachment methods to the support base including easy attachment of stainless steel strut, threaded rod or other project-specific hardware yramid 25 P Pipe and Conduit Support • Lightweight plastic construction • Foam bottom offers low abrasion interface for better roof membrane protection • UV resistant, designed and tested for outdoor use • Compatible with roof surfaces including single ply, bituminous, metal and spray foam
nVent CADDY Pyramid Tool-Free Supports The nVent CADDY Pyramid Tool-Free series offers a unique labor saving solution for supporting electrical and mechanical applications on a variety of roof surfaces. The nVent CADDY Pyramid Tool-Free series restrains pipe, conduit, or cable tray without the need for metal hardware such as strut clamps or installation tools.
NVENT CADDY PYRAMID TOOL-FREE PIPE SUPPORT KIT • Push-in clamps install without the need for additional tools or strut clamps • Ready to use out of the box, saving installation time and labor • Plastic clamps and base will not corrode pipe • Clamps come in two different sizes to fit project needs • Base includes multiple holes to accommodate a variety of clamp sizes and configurations • Additional clamps can be purchased separately for additional pipe runs • Foam bottom offers low abrasion interface for bet
NVENT CADDY PYRAMID TOOL-FREE CABLE TRAY SUPPORT KIT • Push-in pins install without the need for additional tools • Plastic pins and base will not corrode • Pins and mounting holes accommodate most perforated cable tray • Ready to use out of the box, saving installation time and labor • Additional pins can be purchased separately • Foam bottom offers low abrasion interface for better roof membrane protection • Provides superior load distribution, even with varying rooftop surfaces • Compatible with roof sur
NVENT CADDY PYRAMID ROOFTOP ANCHOR SYSTEM nVent CADDY Pyramid Rooftop Anchor Systems help ensure the safety and protection of your rooftop mechanical and electrical equipment applications. The system fastens directly to the roof deck. The anchor is permanently sealed to the roof membrane, creating a watertight barrier. The system offers a superior method of securing rooftop equipment by replacing evasive anchoring techniques and ballasting.
Our powerful portfolio of brands: CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER nVent.com/CADDY ©2020 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. ANSI is a registered trademark of American National Standards Institute. YouTube is a registered trademark of Google Inc. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.
