Technical Bulletin

9www.erico.com/caddypyramid
Part Number Max. Working Load (lbs) H (in) Threads Strut Included? Finish
RPS150T1 150 3-3/16 3/8 - 16 No EG
RPS150T2 150 4 3/8 - 16 Yes EG
CADDY
®
PYRAMID Pipe & Equipment Supports
s Dramatically reduces installation time by replacing
slow and labor-intensive methods for supporting
pipes, conduits, cable tray and equipment on roofs
and below raised floors.
s Supports a wide range of concentrated loads from
50 to 600 lbs.
s Easily increases load capacity by combining
similar CADDY
®
PYRAMID supports (two CADDY
PYRAMID 50 units = 100 lbs).
s Designed to help protect the roof membrane
while absorbing shock and vibration, but will not
absorb water.
s Metal cover protects against weather and other
environmental conditions, such as damage caused
by birds.
s Features a standard electro-galvanized finish for
corrosion protection.
s Passed ASTM
®
A370-30A for mechanical pull testing
between -40º C (-40º F) and +65º C (+150º F).
s Passed ASTM G154 on foam construction for
accelerated UV exposure test.
Part Number Max. Working Load (lbs) H (in) Finish
RPS50H4EG 50 4 EG
RPS50H6EG 50 6 EG
RPS50AHSV 50 2-1/4 Polyester
CADDY
®
PYRAMID 150:
s Supports up to 150 lb loads each
s Has six 3/8 - 16 threaded inserts with captive nuts that allow the product to be
used with standard pipe clamps and accessories
s Large 16” x 12” footprint distributes load more evenly than alternative methods
s Polyethylene closed-cell foam and 14-gauge steel construction
s Electro-galvanized (EG) finish on top plate for added corrosion protection
CADDY
®
PYRAMID 50:
s Supports up to 50 lb loads with each support
s Polyethylene closed-cell foam and 16-gauge steel construction
s The 4” model has a 10-3/8” x 4” footprint
s The 6” model has a 10-3/8” x 4-3/4” footprint
s Electro-galvanized (EG) finish or polyester on the plenum version provide
superior corrosion protection