Cut Sheet

LOW VOLTAGE MOUNTING PLATE FOR NEW CONSTRUCTION, 2 GANG

CATALOG NUMBER

MP2S

CERTIFICATIONS

FEATURES

Provides a bracket for mounting low voltage Class 2 communication outlets

Reduces bulges in the dry wall caused by plaster rings

May be installed to the front or the side of the metal or wood stud

Side support provides for a rigid installation

Attaches with self-tapping screws or nails

Works with wood or metal studs

PRODUCT ATTRIBUTES

Material: Steel

Finish: Pregalvanized

Gang: 2

Drywall Thickness: 1/2" – 5/8"

Height: 4 1/2"

PAGE 1
LOW VOLTAGE MOUNTING PLATE FOR NEW CONSTRUCTION, 2 GANG CATALOG NUMBER MP2S CERTIFICATIONS FEATURES Provides a bracket for mounting low voltage Class 2 communication outlets Reduces bulges in the dry wall caused by plaster rings May be installed to the front or the side of the metal or wood stud Side support provides for a rigid installation Attaches with self-tapping screws or nails Works with wood or metal studs PRODUCT ATTRIBUTES Material: Steel Finish: Pregalvanized Gang: 2 Drywall Thickness: 1/2"
PAGE 2
Width: 5.800" A: 2.667" Hole Size 1: 0.156" Hole Size 2: 0.187" ADDITIONAL PRODUCT DETAILS No load rating, for positioning only. DIAGRAMS WARNING nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative.