Cut Sheet

HAMMER-ON FLANGE CLIP, BOTTOM MOUNT WITH STUD, SPRING STEEL,

5/16"–1/2" FLANGE

CATALOG NUMBER

M58S

CERTIFICATIONS

FEATURES

Can be used to support boxes, fixtures or other applications from beam flanges

Captive threaded stud minimizes the need for additional hardware

Assorted attachment points provided to reduce inventory

Requires only a hammer to install

PRODUCT ATTRIBUTES

Material: Spring Steel

Finish: nVent CADDY Armour

Flange Thickness: 5/16" – 1/2"

Rod Size: 1/4"

Screw Diameter: 1/4"

Screw Length: 3/8"

PAGE 1
HAMMER-ON FLANGE CLIP, BOTTOM MOUNT WITH STUD, SPRING STEEL, 5/16"–1/2" FLANGE CATALOG NUMBER M58S CERTIFICATIONS FEATURES Can be used to support boxes, fixtures or other applications from beam flanges Captive threaded stud minimizes the need for additional hardware Assorted attachment points provided to reduce inventory Requires only a hammer to install PRODUCT ATTRIBUTES Material: Spring Steel Finish: nVent CADDY Armour Flange Thickness: 5/16" – 1/2" Rod Size: 1/4" Screw Diameter: 1/4" Screw Length:
PAGE 2
Static Load 1: 100 lb Static Load 2: 75 lb Static Load 3: 25 lb DIAGRAMS WARNING nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative.