Cut Sheet

BOLT CLOSE CONDUIT/PIPE CLAMP, STEEL, 1/2" EMT, 1/2" RIGID/PIPE, 1/4"

HOLE

CATALOG NUMBER

CD0B

CERTIFICATIONS

FEATURES

Retained bolt and built-in nut means there are less parts to handle or drop

Combo head bolt works with slotted, hex, #3 phillips or #2 robertson drivers

PRODUCT ATTRIBUTES

Material: Steel

Finish: Electrogalvanized

Nut Type: Built-In Nut

Outer Diameter: 0.670" – 0.840"

EMT Conduit Size: 1/2"

Rigid Conduit/Pipe Size: 1/2"

Hole Size: 1/4"

Static Load 1: 200 lb

PAGE 1
BOLT CLOSE CONDUIT/PIPE CLAMP, STEEL, 1/2" EMT, 1/2" RIGID/PIPE, 1/4" HOLE CATALOG NUMBER CD0B CERTIFICATIONS FEATURES Retained bolt and built-in nut means there are less parts to handle or drop Combo head bolt works with slotted, hex, #3 phillips or #2 robertson drivers PRODUCT ATTRIBUTES Material: Steel Finish: Electrogalvanized Nut Type: Built-In Nut Outer Diameter: 0.670" – 0.
PAGE 2
Static Load 2: 50 lb DIAGRAMS WARNING nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.