Cut Sheet

SNAP CLOSE CONDUIT TO ROD/WIRE CLIP, 1" EMT, 1.18"–1.38" OD, 1/4" ROD,

#12 WIRE

CATALOG NUMBER

4Z3416M

CERTIFICATIONS

FEATURES

Provides attachment of conduit and cable

PRODUCT ATTRIBUTES

Material: Spring Steel

Finish: nVent CADDY Armour

EMT Conduit Size: 3/4";1"

Outer Diameter: 0.922" – 1.378"

Rod Size: 1/4"

Wire Size: #12

Flange Thickness: 1/8" – 3/8"

PAGE 1
SNAP CLOSE CONDUIT TO ROD/WIRE CLIP, 1" EMT, 1.18"–1.38" OD, 1/4" ROD, #12 WIRE CATALOG NUMBER 4Z3416M CERTIFICATIONS FEATURES Provides attachment of conduit and cable PRODUCT ATTRIBUTES Material: Spring Steel Finish: nVent CADDY Armour EMT Conduit Size: 3/4";1" Outer Diameter: 0.922" – 1.
PAGE 2
ADDITIONAL PRODUCT DETAILS NEC® 300.11 requires dedicated drop wire/rod and EC311. 6Z parts installed on 3/8" (M10) smooth rod in the F2 direction has a Static Load Rating of 15 lb (67 N). WARNING nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative.