Cut Sheet

SNAP CLOSE CONDUIT TO CONDUIT CLAMP, 1" EMT1, 3/8" EMT2, 3/8"

FLEXIBLE, 14-2 TO 12-3 MC/AC, 1.181"–1.378" OD1, 0.551"–0.709" OD2

CATALOG NUMBER

166M

FEATURES

Fast and easy assembly for lightweight loads

No screws or bolts required

PRODUCT ATTRIBUTES

Material: Spring Steel

Finish: nVent CADDY Armour

EMT Conduit Size 1: 3/4";1"

EMT Conduit Size 2: 3/8"

Flexible Conduit Size: 3/8"

MC/AC Cable Size: 14-2 to 12-3

Outer Diameter 1: 0.922" – 1.378"

Outer Diameter 2: 0.551" – 0.709"

Ultimate Static Load: 100 lb

PAGE 1
SNAP CLOSE CONDUIT TO CONDUIT CLAMP, 1" EMT1, 3/8" EMT2, 3/8" FLEXIBLE, 14-2 TO 12-3 MC/AC, 1.181"–1.378" OD1, 0.551"–0.709" OD2 CATALOG NUMBER 166M FEATURES Fast and easy assembly for lightweight loads No screws or bolts required PRODUCT ATTRIBUTES Material: Spring Steel Finish: nVent CADDY Armour EMT Conduit Size 1: 3/4";1" EMT Conduit Size 2: 3/8" Flexible Conduit Size: 3/8" MC/AC Cable Size: 14-2 to 12-3 Outer Diameter 1: 0.922" – 1.378" Outer Diameter 2: 0.551" – 0.
PAGE 2
ADDITIONAL PRODUCT DETAILS For 14-2 through 12-3 MC/AC cable, use part 166M. Total load of trapeze must not exceed 100 lb. WARNING nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative.