Cut Sheet

PUSH IN CONDUIT TO CONDUIT CLAMP, 3/4" EMT1, 1" EMT2, 1/2" RIGID1,

3/4" RIGID2, 0.866"–1.18" OD1, 1.18"–1.378" OD2

CATALOG NUMBER

12P16P

FEATURES

Ideal as spacer between same or different size conduit

No tools required for installation

Top conduit to be used for support only, not a raceway

PRODUCT ATTRIBUTES

Material: Spring Steel

Finish: nVent CADDY Armour

EMT Conduit Size 1: 3/4"

EMT Conduit Size 2: 1"

Rigid Conduit Size 1: 1/2"

Rigid Conduit Size 2: 3/4"

Outer Diameter 1: 0.866" – 1.180"

Outer Diameter 2: 1.180" – 1.378"

Ultimate Static Load: 25 lb

PAGE 1
PUSH IN CONDUIT TO CONDUIT CLAMP, 3/4" EMT1, 1" EMT2, 1/2" RIGID1, 3/4" RIGID2, 0.866"–1.18" OD1, 1.18"–1.378" OD2 CATALOG NUMBER 12P16P FEATURES Ideal as spacer between same or different size conduit No tools required for installation Top conduit to be used for support only, not a raceway PRODUCT ATTRIBUTES Material: Spring Steel Finish: nVent CADDY Armour EMT Conduit Size 1: 3/4" EMT Conduit Size 2: 1" Rigid Conduit Size 1: 1/2" Rigid Conduit Size 2: 3/4" Outer Diameter 1: 0.866" – 1.
PAGE 2
DIAGRAMS WARNING nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty. North America Europe Europe APAC +1.