User's Manual

8
Function for Installer – Factory Default Password :123456
1. Enter password to start the menu. LCD shown as below(Enter the password and do
the function setting according to your need)
l Incorrect password entering will show “ Access Denied” and will emit beep sound
warning.
l If 3 incorrect password are entered, keyboard disabled and locked (LCD shown as below).
Try it again after one minute idle or use Remote Control Handset ( DISARM button) to
disarm the system.
l If 9 incorrect password are entered, (has 3 times keyboard locked, system disabled and
locked, LCD shown as below). It will trigger alarm but won’t dial out the phone number.
you can use Remote Control Handset ( DISARM button) to disarm the system.
2. If the password is correct (default 123456), It will have beep sound and LCD panel shown as
below.
3. Select the Number setting
0 -SET Function menu : Press 0 to start setting
(1) 0-T : For time setting (Default is 30 seconds.) minimum 1 second, maximum
255 seconds.
Press 0 button, will go to time setting (exit, alarm, entry) time
Access Denied
HOME SECURITY
KEYBOARD LOCKED
System Lock
SYS_OPTS: 0-SYS_OPTS
1 – SEQ 2 – REPLAC 3 - CLR
Access Granted
Install Mode
Code : ******
Setting : 0 – T 1 2 3 4 5 6 – P
7 – MSG 8 – DIAL 9 - CODE
Setting : Time 1 - Exit
2 – Alarm 3 - Entry