User Guide

WARNING:
Please make sure that the selected firmware is actual for the NUX Mighty Plug Pro. Otherwise, you
may brick your Mighty Plug Pro or cause it to malfuction.
Do NOT unplug anything during the upgrading process.
3.2 Click "Start Update" to start upgrading the firmware. It takes roughly 3-5 minutes to finish, during this
process, the [PRESET] switch blinks in ORANGE.
3.3 Once the firmware is successfully upgraded, the following alert window should pop out notifying you
that the upgrade is completed, and the [PRESET SWITCH] indicator start to blink in GREEN.