The power supply cans hou be Sprigged when unused for lng period of rm. 7. Protect ttm prier cons fom being welled oa or pinched pure at pga, ‘commendation sagacious and at the point whet hay ck Fun a Wattle. . Progeny lining at Hh erbium lave may causal Prairie hiring les and ‘damage. Samey be are to pass “swe dark”.
the effect blocks’ order? Absolutely! You can do lots of things with this Intuitive Interface! The Mighty Amp™ APP and Mighty Edttor™ editor software can lst you tweak all the signal blocks and parameters. The MIGHTY PLUG PRO offers GATE, COMP, EFX, AMP, IR, EQ, MOD, DLY and RVB, you can adjust the block order freaky. In addition to the 34 bully-In IRs, thees are 20 empty slots for 3rd party IRs loading. The Mighty Editor™ edit software will convert the WAVIER) sample rate automatically.
POWER/MUTE button Hold the POWER/MUTE bunion for 2 seconds to tum on the device. While the device is engaged (the PRESET switch indicator will alas tum on), short press the POWER/MUTE button can mute the headphone out, in the meantime the PRESET switch indicator will flash. VOLUME + buttons While the device is engaged, you can press the VOLUME + button to increase the headphone volume, or press the VOLUME — button to decrease the headphone volume.
BATTERY Indicator ‘While you connect the Included USB-C cable to the device with PC or charger, It will charge the device, and the BATTERY Indicator will show “Green” while charging. When the battery Is full, the BATTERY Indicator will turn off. When the device Is running out of battery power, the BATTERY Indicator will flash “Red”. Note: The charging time Is around 2.5 hrs. Operation teems ls around 5 hrs.
RESET port If your MIGHTY PLUG PRO freezes while operating, you can press the RESET port to reboot the device. 1/8” (3.5min) stereo headphone output Connect your headphone and get great silent practice ‘experience with MIGHTY PLUG PRO. Iota: The headphone out also supports ERRS earbuds with mic or headset with mic. You can engage the MIC via the Mighty Amp™ APP or Mighty Editer™ edit software while IRs Note: Once activated, the microphone signal can streamed via USB audio.
Mighty Editor™ edit software Click the £¢ icon and chews “Loop back” In “Routing Mode”. Click the Bluetooth con to display the Microphone Settings rr and Bluetooth Settings. Click the « con on Microphone wi Settings to engage the MIC. USB-C port The USB-C port Is used to charge the device, access the Mighty Editor™ edit software communication, USB audio ‘stream, and Arm wars updates. Charging time: around 2.5 hrs, the butt-in battery is 3.7V / 1450mAh. You can charge the device USB charger.
Mare Update: Connect USB with PC, hold the PRESET switch and tum on the device by pressing the POWER button to enter DFU {Device Firmware Update} mode. Then use the DFU updater software to update the firmware. (You can get the firmware and firmware update guide on the product page.} Client Practice: Plug the MIGHTY PLUG PRC into your guitar, put on the headphone, and rock out without disturbing your neighbors. Jam with backing traces through mobile device via Bluetooth audio stream.
gy EAR You can check the MIGHTY PLUG PRO tutorial on NUX EFX. YouTube channel for more details. The Mighty Amp™ APP allows you tweak parameters, move block order on the mobile phone. Additionally, you can set Events on Jam Track or load custom tracks Into your phone through the PC. ‘The Mighty Editor™ edit software can load 3rd party IRs and You can tweak parameters for all effects. Lie the editor to change tha order of the sf fact blocks, and export or import presets. «Small but mighty.
e Input Impedance: 1MQ » Headphone Output Impedance: 10Q # Dynamic Range: 10348 © Sampling Rate: kHz / bit System Latency: 1.2ms ® Charging Power: 5V USB-G Battery: 3.7v/ 1450mah ® Current Draw: 4V/ 260mA Dimensions: 81mm(L} x 41mm) x 30mm{H} Weight: 70g WARNING “To reduce the risk of ira or strict shock, do not expos this appliance to in of moisture, FCC Warning ‘Th ix device complies with part 15 of the FCC Rules.
