Thank you for choosing the nu Loop Core pedal! Loop Core allows you to record and create music phases and play back as loops! Whether you practice, compos, or play ive gigs, you will get Inspired by the well-considered functions of Lapp Morel Plasma take the time to read this manual carefully ta get most aut of the unit. We recommend that you keep the manual at hand for future reference. Ea Record and overdub as many layers az you n Upton 6 Hours recording time.
PRODUCT INTERFACE 1.DISPLAY It Indicates the memories and rhythm number, and other setting Information. 2.LOOP knob To adjust the playback volume level of the recorded audio. 3.RHYTHM knob To adjust the volume level of tha Maintain rhythm tracks. button ‘To save the current phrase or delete the phrase in current memory. 5.5TOP MODES button the way you want to stop during playback after you p. 1.
8.RHTHM button niu Is for tuning on/off the rhythm or selecting rhythm that you ars recording. they you ars overdubbing. currant phat During overdubbing, both DUB and PLAY will light up. 6.TAP button Press this several times In ime to settee tempo of rhythm. ‘This can sangs the playback speed of a saved lap. .Up and Down buttons ar selecting memory numbs: setting options. 10. Faot Switch To record, overdub, play yo to stop, undo/redo and clear recording.
16.0ut L/ Out R Stereo These output the signal to your guitar amp or mixer. Qut LIg the main mono output. If you only Input your guitar as money signal, please use Out L. IMPORTANT NOTICE: ut works a3 the power trigger as wall. Unplug the cabs from Out L well turn off the power of Loop Cora. If you Input stereo signal from AUX In, nd the Sound Is only output from Out L to monaural system, the sound will be output as mono signal. INSTALLING THE BATTERIES plod with the unit.
POWER ON/OFF ‘When running the unit on battery prows, Inserting 8 plug nto devices, always turn down the volume, and um off the pwr on all devices before making any connections. Ona the connections have bean completed, tum on parer to ‘your various device In the order specified. By truing on device In the wrong order, you risk causing malfunction and/or d thee dive When powering up: Turn on the parer ta your guitar amp last. ‘When powering down: Tum off the power to your guitar amp first.
OPERATION INSTRUCTION 1.TO RECORD AND CREST A LOOP PHRASE ABNORMAL RECORDING MODE (Default) 1.1.1 Select a empty memory location by pressing the Up and Down arrows. The display shows the currant memory numbs. A dot at the down right corner of the display means the currant memory number already has dale saved. dat, it means th and you can start fo create a new loop and save it in this memory location. 1.1.2 RECORD: Crass the pedal to start to record a loop. 1.1.
AUTOMATON RECORDING MODE Yau can temporary set the Lapp Core to Auto Recording mode by following below steps: 1.2.1 Under an empty memory slat, press and hold STOP MODE button for 2 sac, “fT will be blinking on the display, pre OP MODE button again within 2 change Ito snails Auto Recording mods. un thug mode, the first teems You rags the pedal retarding standby sf and the REC LED blinking. It automatically starts recording as son detects input sound signal from AUX In or Input jack. 1.2.
1.48TOP MODES LOOP GORE has three stop modes that you can choose to finish the playback. 1.4.1Befors start playing a loop or during playback, you can press STOP MODES buttons to salacity the way you want the loop to nd after you double-press the pedal. SL: Instantly stops. *F™: stop at the ending of this loop. FR: fade out and stop in sec. 1.4.21 you choose FA”, after you double-press tha pedal during playback, the PLAY LED will start blinking until It finally stops.
1.8.34 the data Including recordings, stop mode, tempo and elected rhythm pattern will be saved. But recording ods wil nat bo saved Auto Recording mode can only be temporary sst {ses 1.2). NOTE: You cannot save to a memory location that already has data. During atop 1.8. button and the next m: will lead you ta the clews 1.7 COPY A LOOP PHRASE ‘You may want to copy a saved loop to another memory location by following below ste 1.7.1Choosa the memory loop that you want to pacy. 1.7.
pressies RHYTHM or TAP TEMPO button to tum on the rhythm. The default sound Is metronome click. The RHYTHM button blinks to indicate the tamp. If you start the rhythm after the loop has been recorded, the Loop Core will automatically detract the tempo of the loop. 2.2 TAPPING button lights up to indicate that you can use this to set tempo. If this button dos nat light up, it means tap tempo is not possible in such status, i.8. during retarding or overdubbing. 2.
3.USING EXTENSIONAL CONTROL PEDALS You can plugin an ext I control pedal to the Carl In jack, i.8. Cherub WT-004 Pedal (optional) to have mots hand-free control during live performance: .4 Plug In the WT-004 to Carl In Jack on Loop Core with the WT-004 NOT pressed for at least | abscond, so that the Lapp Core can recognize the pedal. 3.28tap: short press the WT-004 acne to spat during retarding, overdubbing and playback. Sam as double press the pedal of Loop Core. 2.
4.USB CONNECTION Connect a USB cable {elks the USB cable for digital cameras) twe dt port WAY Ties to Loop Care, or backup the recording phrases from Loop Core to your PC: 4.1 To Import a WAV file to Loop Core 4.1.1 Click and open the Removable Disk of Lap Core, and open the “Cherub” folder. 4.1.2 Open the WAY older, and there will be 99 folders or 99 memory numbers: “W002” Choose ane amply fold wan WAV file to. For example: folder “W031”. 4.1.
5.2 Press and hold Up or Down button for 2 sac until the display shows “Fo”, 5.3 Pres the pedal acne again to confirm formatting. Or, press any other buttons other than the pedal to abandon formatting. 'WAR Formatting the Loop Core will wipe away all recordings from Loop Gore and set everything to factory tastings.
