User Guide

Introduction
This guide is intended to provide instructions on how to
insert or remove a cartridge from an installed LumAir
LA100 Pathogen Detection System.
Cartridge (in Foil Bag) Sterile Gloves
Bio-Hazard Safety Disposal Bag Cartridge Removal Tab
1. Put on sterile gloves using
sterile technique
2. Remove Cartridge from foil
pack & zip lock bag
3. Peel back sticker to remove
cartridge pull tab
4. Once the pull tab is removed,
re-seal with sticker
5. Insert cartridge fully into the
unit
6. LED status changes to green -
Active
Step 1: Inserting a New Cartridge (visual steps)
Sticker
Pull
Tab
Package Contents