User Manual

S
Setting of User
With device turned off, press and release “SET” buon to show the c urrent user.
Press “SET” buon to toggle between User 1 and User 2.
To select user, press “START/STOP” to confirm and then the device turns off.
S
Setting of Year, Date, Time
(12-hour/24-hour System)
1. With device turned off, press and hold “SET” buon unl flashing year digits
occur.
2. Press “MEM” to increase one year, or press and hold “MEM” to increase years.
Press “SET” to confirm and then flashing month digits occur.
3. Press “MEM” to increase one month, or press and hold “MEM” to increase
months. Press “SET” to confirm and then flashing day digits occur.
4. Press “MEM” to increase one day or press and hold “MEM” to increase days.
Press “SET” to confirm and then flashing hour digits occur.
5. Press “MEM” to increase one hour or press and hold “MEM” to increase hours.
Press “SET” to confirm and then flashing minute digits occur.
6. Press “MEM” to increase one minute or press and hold “MEM” to increase
minutes. Press “SET” to confirm and then either “12” digits occur for 12-hour
system or “24” digits occur for 24-hour system.
7. Press “MEM” to toggle between “12” for 12-hour system and “24” for 24-hour
system. Press “SET” to confirm and then pressure unit digits occur.
8. Press “MEM” to toggle between “mmHg” and “kPa”. Press “SET” to confirm and
then either voice“ON”digits or“OFF”digit occur.
9.Press “MEM” to toggle between voice“ON”and “OFF”. Press “SET” to confirm and
flashing year occur again, or press “START/STOP” to confirm and then the device
turns off.
10. Seng is completed.
N
Note: Pressing “START/STOP” will confirm the setting and then the device turns off at
a
any time.