User Manual

Operation

1. Choose a suitable massage head and screw it into the massage gun.

2. Long Press the Power button to turn on the device. A blue light will then illuminate. It will

automatically enter LOW power mode; short press the Power button once to enter MEDIUM

power mode; and short press the Power button again to enter HIGH power mode.

These 3 intensity levels circulate and change in the said order by pressing the Power button. Set

the device at a desired speed and on a desired place, apply pressure accordingly.

3. Each program stops after 10 minutes of operation.

4. Long Press the Power button to turn off the device.

5. When intensity appears slow, place the device on the charging base for recharging.

How to use Hot-Head Attachment:

Hot-Head Attachment helps to release tension and pain in your muscles. Screw the Hot Head

attachment into your massage gun and turn On the Heat located at the back of the massager. Now

turn On the Massager (Long-Press the Power-On Button of the massager). Red light illuminates

around the Hot-Head attachment. Wait for 3 to 4 minutes for the hot-head to heat-up. Set the

massage gun at a desired speed and on a desired place.

Remember to turn off the Heat button after massage.

How to use Cold-Head Attachment:

Cold-Head Attachment helps to treat the muscle inflammation. Before using the Cold-Head

attachment, place the Cold-Head Attachment in a freezer for about 2 hours for best results. Fix the

Cold-Head Attachment on your massager and turn On the Massager (Long-Press the Power-On

button of the massager). Set the massage gun at desired speed and on desired place.