Instructions / Assembly

Simple & Effective
Package Contents
System Maintenance
The Manor Water Softener is the most
simple and effective softener available.
It requires no drains, no electricity,
no calibration, and little maintenance.
Because the softening formula is citric-
acid based, an FDA-approved compound,
it is safe for all household uses, including
drinking, bathing, and watering plants.
Your new NuvoH2O system mounts
directly to your home’s main internal
water line and doesn’t require a
soft-water loop.
We strongly suggest hiring a certified
installer or professional plumber.
However, if you are experienced with
home plumbing, we’ve included these
instructions to install your NuvoH2O
softener. Please note that by choosing to
install your system yourself, you assume
the liability for its installation.
This package includes: system housing
(head and sump), mounting bracket,
softening cartridge, wrench, tapcon screw
pack, system head screw pack, O-ring,
lubricant, installation guide, and
warranty/registration card. Because
plumbing standards vary, other bushings
and connectors are not included.
Once installed, your Manor Water
Softener requires minimal maintenance.
The only maintenance you should expect
to perform is when it comes time to
replace your cartridge about every
six months. You should also replace
the O-ring with every other cartridge
replacement. See page 5.
Again, thank you for choosing NuvoH2O.
We look forward to providing you with
convenient, eco-friendly, salt-free and
potassium-free soft water for many
years to come!
3NuvoH2O.com
Manor Water Softener