INSTALLATION AND OPERATING INSTRUCTIONS TOOLS REQUIRED @Electric drill @ Phillips head screw driver ®9/16" Drill bit ® Standard head screw driver CAUTION Before installing your track lighting Kit refer to the section entitled "Electrical Connections" if you feel you do not have electrical wiring experience, qualified licensed electrician, The important safeguards outlined in these instructions are meant to cover all possible conditions and situations that may occur.
4.Check circuit load carefully, The maximum electrical capacity of this track system is 15 amps per circuit for permanent installations.A standard 120V 15A circuit is designed to carry a maximum of 1800 watts therefore, we recommend that the total wattage of all the lights and appliances presently attacked to the circuit should not exceed 1440 watts or 80% of the maximum electrical capacity.
TOGGLE BOLT ZN FLOATING CANOPY TRACK HEAD INSTALLATION 1. Plgce track head in‘desired position and assert top of track head connector into track, 2 Rotate connector 90° until track Head loss info place ony brackishness Illustration UNIMPORTANT connector does not tum freely donor force! Instead tum In opposite direction, 3.
