Installation Sheet

2
© Copyright 2020 Satco Products, Inc.
Detection Area
In this area, movement will
be detected and able to
trigger the sensor. 100%
detection area is also known
as the strong sensitivity.
Hold-Time
The period of light keeping
100% brightness after
moving objects leave the
detection area.
Daylight Threshold
Denition of the ambient brightness;
only when the ambient brightness
is lower than the preset specic lux
amount, the sensor will work; when
it’s preset as “disable,” the sensor
works every time it detects motion
regardless the ambient brightness.
MOTION SENSOR SETTINGS
Settings for 62/1211 & 62/1213
With sufcient daylight, even
when motion is detected,
light remains OFF.
When motion is detected,
the sensor will switch ON the
light to 100% brightness.
With insufcient daylight,
when motion is detected,
the light will turn ON.
After people leave the
detection area, light remains
100% of brightness within
hold-time.
After the last motion
detection and the present
hold-time elapses, the light
will turn OFF.
After the last motion
detection and the present
hold-time elapses, the light
will turn OFF.
Automatic ON/OFF Function: Lights automatically turn ON when movement is detected and OFF when no movement
is detected (after people leave at night.) Applications: Corridors, Staircases.
No Daylight Function: The daylight threshold is set to “Disable.” Light turns ON when movement is detected.
After people leave or when no motion is detected, the light turns OFF after hold-time. Applications: Dim places such as
Basement Parking, Underpass.
MOTION SENSOR APPLICATIONS
T3s
3
4 5
30s
90s
5min
10min
30min
Disable
6
7 8
50Lux
25Lux
10Lux
2Lux
100%
1
2
75%
50%
25%
Switch UP
Switch DOWN
Switch UP
Switch
DOWN
Switch UP
Switch
DOWN
Switch UP
Switch
DOWN
I
II
III
IV
I
II
III
IV
V
I
II
III
IV
V
VI