Installation Sheet

ManualsBrandsNuvo Lighting ManualsIndoor Ceiling Fixtures14" Wide LED Flush Mount Drum Ceiling Fixture - CCT Selectable

WARNING: Risk of Fire or Electric Shock

• To avoid damage, falling, electric shock or re, do not modify the xture or replace

accessories without conrming with the supplier rst.

• Only authorized, qualied personnel should install this xture and should follow the

owner’s manual. Any improper installation might cause failure, electric shock, re

or other injury, damage or hazard.

• Disconnect power before installation or any maintenance of the xture.

• To prevent re, this xture is rated for use in 120VAC.

• The product is for interior use only, suitable for damp location.

• Protect the product against direct contact with water.

• For use in environments where an accumulation of non-conductive dust on the

xture may be expected.

• Clean with a soft or damp cloth, making sure the power is OFF.

• The product (without integrated sensor) is dimmable and compatible with most

residential dimmers.

• 5 Year limited warranty only in respect of any defect in material.

IMPORTANT: This product must be installed in accordance with the applicable

installation code by a licensed electrician familiar with the construction and operation

of the product and the hazards involved.

LED FLUSH MOUNT

FIXTURE

Models: 62-1210, 62-1211, 62-1212, 62-1213

Satco Products, Inc.

Brentwood, NY 11717

INSTALLATION AND SAFETY INSTRUCTIONS

IMPORTANT: Read before installing xture. Retain for future reference.

16W: 62-1210, 16.5W: 62-1211

O/ 11.5" (293mm) x 3" D ( 77.1m m)

20W: 62-1212, 20.5W:62-1213

O/ 14" (355.5mm) x 3.5" D (9 0.1mm)

INSTALLATION:

STEP 1: Turn OFF power

supply and disassemble

the junction box and lamp

cover.

STEP 3: Connect

wires separately (see

wiring diagram). Cap

all connection with wire

nuts (included). Secure

assembly to junction

box with screws

(included). Reassemble

the lamp cover.

STEP 4: Installation is

complete. Turn power ON.

STEP 2: Select color

temperature (CCT):

3000K, 4000K or 5000K.

The default adjustment

range is 4000K, left

is 5000K, and right is

3000K.

BLACK

WHITE

GREEN

LINE

NEUTRAL

GROUND

Wiring Diagram

Fixture

5000K / 4000K / 3000K

Summary of content (4 pages)

PAGE 1
LED FLUSH MOUNT FIXTURE Models: 62-1210, 62-1211, 62-1212, 62-1213 INSTALLATION AND SAFETY INSTRUCTIONS IMPORTANT: Read before installing fixture. Retain for future reference. WARNING: Risk of Fire or Electric Shock • T o avoid damage, falling, electric shock or fire, do not modify the fixture or replace accessories without confirming with the supplier first. • Only authorized, qualified personnel should install this fixture and should follow the owner’s manual.
PAGE 2
MOTION SENSOR SETTINGS Settings for 62/1211 & 62/1213 Switch UP Switch DOWN Switch UP Switch DOWN 1 Switch UP 2 3 4 Switch UP 5 6 7 8 I 100% I T3s I Disable II 75% II 30s II 50Lux III 25Lux IV 10Lux V 2Lux III 50% IV 25% Detection Area In this area, movement will be detected and able to trigger the sensor. 100% detection area is also known as the strong sensitivity.
PAGE 3
ESPAÑOL: LUMINARIA LED DE EMPOTRAR Modelos: 62-1210, 62-1211, 62-1212, 62-1213 INSTRUCCIONES DE INSTALACIÓN Y SEGURIDAD IMPORTANTE: Lea esto antes de instalar el accesorio. Consérvelo para referencia futura. SEGURIDAD: Riesgo de incendio y descarga eléctrica • Para evitar daños, caídas, choques eléctricos o incendios, no modifique la lámpara ni reemplace accesorios sin la confirmación previa del proveedor.
PAGE 4
FRANCAIS: LUMINAIRE ENCASTRÉ À DEL Modèles: 62-1210, 62-1211, 62-1212, 62-1213 INSTRUCTIONS SUR L’INSTALLATION ET LA SÉCURITÉ IMPORTANT: Lisez avant d’installer le luminaire. Conservez à titre de référence. SÉCURITÉ: Risque d’incendie ou de décharge électrique • Pour éviter dommages, chutes, décharges électriques ou incendies, ne modifiez pas la lampe ou ne remplacez pas les accessoires sans confirmation préalable du fournisseur.