Installation Sheet

1
Make wire connections between
fixture and junction box connect
wires to AC cables from junction
box with wire nuts ( provided ):
L side to Black AC wire, W side to
White AC wire.
Push and feed all wires up into
junction box.
Lift fixture up against bracket.
Step 5
Place all 3 legs of bracket within
walls on the back of fixture.
Align the arrow sign  from
bracket to unlock-sign  from
fixture.  Turn clockwise to
locked-sign  to lock fixture in
place. Remove label.
Step 6
Attach the bracket to junction box
using the 2 screws (provided).
Pull the AC cables through the
bracket center hole.
Step 1
Mount 3 drywall plugs (provided) in
ceiling through the bracket. (For
installation on wooden surfaces use
the smaller hole and the wood
screw).
Step 2
2
Use M4 screw to install ground from
the grid(AC) and from fixture, to the
bracket.
Step 3
Slide convenience wire into slot of
bracket. Rest product on conve-
nience wire while doing eletrical
installation. Do not disconnect
convenience wire after installation.
Step 4
3 4
6
TWIST AND LOCK
5
Tools Required
Philips Screwdriver
Package Contents
8/32 US screw x2
Drywall plug x3
M4 short screws x1
Self tnb screw x3
(wood screw)
For instalation on the wooden
surfaces use the smaller hole
and the wood screw.
Six
warranty
warranty
www.satco.comcustomer service 1-800-43-SATCO
2 3