Install Instructions

nuvowater.com

877-688-6426

INSTALLATION STEPS

For Manor System

Please read all instructions before beginning installation

1 Turn o main water supply line leading to proposed installation site.

2 Using screws provided, attach the Wall Mounting Panel horizontally (softener

must hang vertically) to wall studs through top left hole and top right hole of

Wall Mounting Panel.

3 DO NOT REMOVE the Housing Head from the Housing Body for Installation

Steps #4 through #6. After the Black Top has been re-fastened in Step #6,

the Housing Body may be removed to make

it easier to attach the L-Bracket/Housing

Head Assembly to the Mounting Panel.

4 Unscrew the Black Top of the Housing

Unit. This is held together with a single

screw in the middle.

5 Attach the L-Bracket to the Housing

Head and secure it with the four

screws provided. See FIG. 1

Attach L-Bracket

to Housing Head

with 4 Screws.

FIG. 1

These screws must be

securely attached to stud.

FIG. 2

6 Replace the Black Top of the Housing

Unit and re-secure it with the single

screw removed in step 4.

7 Attach the L-Bracket/Housing Head

assembly horizontally to the Wall

Mounting Panel under the “Softener”

label. The right L-Bracket screw

should go through the Wall Mounting

Panel and into the wall stud.

See FIG. 2