User Manual

1. Eachblockcanbeindividuallyturnedactiveorinactiveformotiondetection.Using

thearrowkeys(q / p / t / u)onyourOSDController,navigatetoanyareaofthe

screenthenpressthe[SET]keystobringupthesub-menu.

2. Selectthatparticularblockactiveorinactive,orscrolldownto‘SETALLBLOCK’or

‘CLEARALLBLOCK’toactiveordeactivatetheentiregrid.

3. Scrolldownto‘SAVE&EXIT’andpressthe[u]rightkeyonceallthedesireareasof

thegridhavebeenactivatedtosavechangesandexit.

SELECT MODE

MOVE

SET

CLEAR

SET ALL BLOCK

CLEAR ALL BLOCK

SAVE & EXIT

OSD Menu Terms & Settings