User Manual

32
OSD Menu Terms & Settings
7. MOTION
The MOTION Menu is used to enable or disable the MOTION DETECTION,
change the HOLD TIME, the SENSITIVITY, or assign the DETECTION AREA of the
EasyView™ 2 dome camera.
• OPERATION:ActivatethemotiondetectionON/OFF.
• HOLDTIME(SEC.):DeterminethedwelltimeoftheMOTIONoutput.(3-60sec.)
• SENSITIVITY:Determinethesensitivityofthemotiondetectionfrom01to20.
• DETECTAREA:Specicareasoftheframecanbemonitoredformovement.
To setup the DETECT AREA, follow the simple instructions below.
1. Selectthe‘OPERATION’to‘ON.’
2. Scrolldowntothe‘DETECTAREA,’thenpressthe[u]rightkeytoenterthearea
selectmode.Agridofsquareswillappear.
OPERATION
HOLD TIME(SEC.)
SENSITIVITY
DETECT AREA
RETURN
SAVE & EXIT
MOTION SETUP
OFF
10
11
MENU:SELECT MODE MOVE